铜包钢扁钢的优势介绍
铜包钢扁钢扁线具有铜层厚、阻值低、耐腐蚀性强、强度高、安装方便、电气连接性能好等优点，广泛用于输变电和通讯线路、电站、建筑物及天线的接地装置中，也可用于计算机等电子设备的接地系统，并可与接闪器（避雷针、避雷线）及引下线组成防雷接地装置。铜包钢扁钢是利用先进的电镀将高纯度电解铜通过电解原理,使其完全附着在钢芯上，在铜钢结合面形成合金化分子级结构,双金属界面完全结合,从而实现铜与钢之间可延性冶金连接,并形成整体.常用作水平接地体，接地干线，以代替成本很高的紫铜排。也可用于计算机等电子设备的接地系统，并可与接闪器（避雷针、避雷线）及引下线组成防雷接地系列装置。
铜包钢扁钢主要技术参数:
1、铜层厚度≥0.3m
2、抗拉强度≥600N/m
3、平直度误差≤0.5m/m
4、铜层可塑性:接地棒及接地圆线弯曲30度时，折角内外边缘无裂缝现象。
5、铜层结合度:经附着利试验，除虎口钳口出现剥落铜层，其余部分铜钢结合良好，为出现剥离现象。
镀铜扁钢
镀铜扁钢是由世界一流的电镀技术在低碳钢上电镀纯度为99.9%以上的点解铜而成，镀铜层各点厚度为0.254mm以上，具体应用:用于设备接地引下线、地网水平接地导体、电缆沟及杆塔水平接地导体，布线整齐方便。镀铜扁钢跟其他的水平接地导体相比，有着巨大的优势:价格便宜。
电镀铜包钢扁钢具体型号及规格:
最为常用的镀铜扁钢扁线扁钢常用规格:3*30 3*40 4*40 5*50 6*60
铜包钢扁钢型号外型
尺寸参考重量
（kg/m）供货
长度
TFG003-2020×30.536米/根
TFG004-2525×40.89
TFG 003-3030×30.80
TFG 004-3030×40.80
TFG 004-4040×41.42
TFG 005-5050×52.23
TFG 006-6060×63.20
TFG 008-8080×85.70
Introduction to English
Grounding trunk copper clad steel flat steel source manufacturers are cheap
Advantages of copper-clad steel flat steel
The copper-clad steel flat steel flat wire has the advantages of thick copper layer, low resistance, strong corrosion resistance, high strength, convenient installation and good electrical connection performance. It is widely used in power transmission and transformation lines, power stations, buildings and The grounding device of the antenna can also be used for the grounding system of electronic equipment such as computers, and can be combined with the lightning receptor (lightning rod, lightning protection line) and the down conductor to form a lightning protection grounding device. Copper-clad steel flat steel uses advanced electroplating to pass high-purity electrolytic copper through the electrolysis principle, so that it completely adheres to the steel core, forms an alloyed molecular-level structure on the copper-steel joint surface, and the bimetal interface is completely combined, thereby realizing copper and copper. The ductile metallurgical connection between the steels and the formation of the whole. It is often used as a horizontal grounding body and a grounding trunk to replace the costly copper platoon. It can also be used in the grounding system of electronic equipment such as computers, and can be combined with lightning receptors (lightning rods, lightning protection lines) and down conductors to form lightning protection grounding devices.
Main technical parameters of copper-clad steel flat steel:
1. Copper layer thickness ≥0.3m
2. Tensile strength ≥600N/m
3, flatness error ≤ 0.5m / m
4. Copper layer plasticity: When the grounding rod and the grounding wire are bent at 30 degrees, there is no crack in the inner and outer edges of the corner.
5, copper layer bonding degree: After the adhesion test, in addition to the peeling copper layer appeared in the mouth of the tiger mouth, the other part of the copper and steel combination is good, in order to appear peeling phenomenon.
Copper plated flat steel
The copper-plated flat steel is made of world-class electroplating technology on the low-carbon steel with a purity of 99.9% or more. The thickness of each layer of the copper plating layer is 0.254 mm or more. Specific application: for equipment grounding down conductor Ground horizontal conductor, cable trench and horizontal grounding conductor of the tower, the wiring is neat and convenient. Copper-plated flat steel has a huge advantage over other horizontal ground conductors: it is cheap.
Electroplated copper-clad steel flat steel specific models and specifications:
The most commonly used copper flat steel flat wire flat steel common specifications: 3*30 3*40 4*40 5*50 6*60
Copper clad steel flat steel model appearance
Size reference weight
(kg/m) supply
Length
TFG003-2020×30.536 m/root
TFG004-2525×40.89
TFG 003-3030×30.80
TFG 004-3030×40.80
TFG 004-4040×41.42
TFG 005-5050×52.23
TFG 006-6060×63.20
TFG 008-8080×85.70