配备两个强力吸盘(上)
说明:
产品名称 :水族加热棒芯片热敏电阻外调温度加热棒27.6cm长2cm直径300w
精度(内置超温保护)外调温IC-210型加热棒
颜色:黑色
型号:JBA-IC210-300
功率:300w
电压:~AC220-240V/~AC110-120V;50/60HZ
产品尺寸:27.5cm长2cm直径
电线长:1.5米
插头:两脚扁插
包装尺寸:32*10.5*4.5cm
外箱尺寸 :55*36.8*34cm
数量/箱:36根
重量/箱:20.5KG
颜色:黑色和银色可以选择。
CE 安全证书
功能:
1:温度控制范围:18--34℃ 或者64-- 93°F
2:控温精度:±1℃
3:可以完全潜入水中
4: 高性能IC控制水温
5:内置防干烧装置
6: 双重密封绝缘
7:防水等级:IP68
8:适用于淡水鱼和海水鱼
9: 价格底的合理,耗电低,寿命长,有银色和黑色两种颜色。
安装说明:
1:加热棒不应该接触到沙砾或者基扳。
2:使用提供的吸盘,不要将吸盘套在发热丝上。
3:插入插头到电源插座和电源线按“U形放置”(见包
装图示)开启电源。
4:设置温度,使用加热棒顶部的旋钮调到所需的温度,
转动加热棒顶部旋钮直到所选温显示,指示灯亮时表示
正在加温,达到设定的温度时指示灯便会熄灭。
5:确定一个准确的温度计,温度计应放在加热棒的另一端。
重要提示:
1:工作之前,短开加热棒电源。
2:从水族箱取出加热棒前,先关闭电源。
3:如果加热棒破裂或者内部有水分,先断开电源。
4:所有水族箱设备建议装有漏电断路保护。
5:在没有水的水族箱里不要操作加热棒。
6:运做中的水族箱,水位必须维持在最底水位线之上。
7:只供室内使用。
中山市小榄镇精邦电器厂
横巷2号
MSN:zsjingbang@
国内站:
国际站:
注意:
1:经常经常观察温度计,预防温度失控.
2:新购买的加热棒最好用水银温度计校对,等摸透此加热
棒的加热规律才敢大胆使用.
3:根据缸的大小合理配置加热棒的功率,建议60cm以下的缸用100w,60-80cm(含60cm)的缸用200W,100-150cm的缸用300W,150cm以上用300W 另加一支合适功率的加热棒,不建议使用一支大功率的加热棒,环境温度较底场所适当地增加加热棒的功率。
4:普通加热棒建议2年更换一次。
5:养虹鱼的鱼友千万不要忘了给加热棒加护套。
6:水位不能低于最小标记
7:潜水深度1.2米以内
8:电源插头要高于鱼箱
功率Power | Gallons加仑 | Litres升 |
50 | 05-10 | 23-45 |
100 | 10-20 | 45-90 |
200 | 20-40 | 90-180 |
300 | 30-60 | 135-270 |
500 | 40-80 | 150-350 |
售后服务:
质量问题一年内包退换。
SPECIFICATION:
Details : Microchip temperature controlled system right 304 stainless heater
Colour: Black
Item No. : JBA-IC210-300
Power: 300w
Voltage: ~AC220-240V/~AC110-120V;50/60H
Wire length: 1.5m
Plug type:Two feet flat plug
Product dimension:27.5cmL2cmD
Package size: 32*10.5*4.5cm
Cartonsize: 55*36.8*34cm
Pcs/Carton: 36
Weight/CTN:20.5kg
FEATURES:
1: Temperature controlled rang 18--34 degree celcius Or 64--93 Degree fahrenheit
2: Temperature controlled precision:±1℃
3:Can be immersibled into water completely
4: High performance IC water temperature controlled
5:Dry burning prevention device installed inside
6: Double seal insulation
7:Waterproof: IP68
8:Adapt to fresh water and sea water
9:Products with reasonable prices, energy saving, long life, two colour can be choosed:silver and black.
10:Brand JBA and new
HAPPY BIDDING!!! AND BEST OF LUCK!!!
Instruction:
1:The heater should not come in contact with
gravel or substrate.
2:Use the suction caps provided to fasten to the
heater to the aquarium,Suction Caps should be
positioned on the top third of the heater not on
the heating element.
3:Plug the power cord into the power socket and
arrange a "drip loop"(see package picture) and
turn on.
4:To set the heater,use the knob at the top of
the heater to adjust to the desiredtemperature.Continue turning the Knob until the
prefered temperature is displayed ont he heater.A
light Will come on when the heater is working ,it
will switch off when it reaches the settemperature.
5:Confirm your set temperature with urate
thermometer.The Thermometer should be placed at
the opposite end of the aquarium to the heater.A
small variation between the heater's settemperature and thermometers reading is normal.
Important:
1:Always disconnect the heater power supply prior
to working on the aquarium
2:If removing the heater from aquarium,turn it
off at the power supply,wait 10-15 minutes to
allow it to cool,and then remove it from the
aquarium.
3:If the heater is cracked and /or has moisture
inside it,disconnect it from the power supply.
4:A surge protector is mended for all
aquarium appliances.
5:Do not operate your heater when it is not
submerged in water.
6:The water level must be maintained at the
minimum water level line at all times.
7:For indoors use only.
CAUTION:
1:Water level do not below the "MININUM" mark
2:Maximum submergence should be within 120 cm
3:Power plug always higher than the water tank
产品名称 | 电子外调温水族加热棒 | 目前所有认证 | CE |
工作电压 | 100V-120V 或者 220-240V | 水温控制精度 | 土 1 度 |
功率 | 可选用:100W 200W 300W 500W | 外壳颜色 | 香摈银色或黑色手感胶 |
说明:
1,温控器采用高精度集成电路配套高精度电元器件优化的电路设计控温系统,水温控制精度可达1度误差以内,
2,加热棒采用进口304不锈钢外壳底烧焊封底工艺精制,防爆抗冲击,传热效率高
3,加热棒体内置防干烧保护装置,能有效阻击事故的发生,
4,自由的温度调节器器可能让你轻松的将水温从18-34度任意设定,清晰明确的LED指示针所对应温度盘上数据
5,工作电压:AC220V-240或100-120V可选,可生产功率:100W,200W,300W
轻松的外观,大方得体.