3583BT三轴/三向力加速度传感器    3583BT三轴/三向力加速度传感器    3583BT三轴/三向力加速度传感器

　　深圳市汉斯福特科技有限公司

　　杨工

　　概述

　　The Dytran 3583BT is an IEPE triaxial accelerometer with a high sensitivity of 500 mV/g. Design of the model 3583BT incorporates miniature ceramic shear mode sensing elements, mounted to a single support and packaged in a welded titanium housing for a total weight of 27 grams.

　　Dytran 3583BT offers a low end frequency response of 0.25 Hz for excellent phase response at low frequencies. Units also have an electrical noise floor of 0.0002 g RMS, which allows for its excellent signal-to-noise ratio.

　　Units feature an industry standard 4-pin radial connector and stud mount and is epoxy sealed for reliable operation in dirty environments.

　　特性

　　1.   500 mV/g sensitivity

　　2.   (±) 10g range

　　3.   .25 to 4,000 Hz frequency range (±10%)

　　4.   4-pin Dytran designed 1/4-28 radial connector

　　5.   Stud mount

　　6.   Isolated

　　7.   27 grams

　　8.   Epoxy seal

　　9.   Triaxial

　　10.  IEPE

　　应用

　　1.   Modal and structural analysis

　　2.   Noise, Vibration and Harshness (NVH)

　　3.   Squeak & Rattle

　　4.   Vibration control

　　5.   General purpose triaxial vibration measurements

　　参数

　　PHYSICAL

　　Weight, Max. 0.95 oz 27 grams S

　　Material Titanium Alloy Titanium Alloy

　　Sensitivity, ±10%

　　Acceleration Range, ± 10 Gpeak 98.1 m/s2 peak

　　Frequency Range, ±10% 0.25 to 4000 Hz 0.25 to 4000 Hz

　　Resonance Frequency >15 kHz >15 kHz

　　Linearity [3] 1 %F.S. 1 %F.S.

　　Transverse Sensitivity Max 6 % 6 % -100 -20

　　Noise floor 0.0002 Grms 0.002 m/s2 rms 0 -10

　　Spectral Noise 1Hz 30 µGrms/sqr(Hz) 294.3 µm/s2 rms/sqr(Hz) 100 7.5

　　TEMPERATURE

　　Spectral Noise 1Hz 30 µ q( ) 294.3 µ q( ) 100 7.5

　　10Hz 7 µGrms/sqr(Hz) 68.67 µm/s2 rms/sqr(Hz) 200 15

　　100Hz 9 µGrms/sqr(Hz) 88.29 µm/s2 rms/sqr(Hz) 225 20

　　1000Hz 1 µGrms/sqr(Hz) 9.81 µm/s2 rms/sqr(Hz) 250 25

　　10000Hz 1 µGrms/sqr(Hz) 9.81 µm/s2 rms/sqr(Hz)

　　ELECTRICAL

　　Supply Current Range [4] 2 to 20 mA 2 to 20 mA

　　Compliance Voltage Range +18 to +30 VDC +18 to +30 VDC

　　Output Impedance, Typ. 100 Ω 100 Ω

　　Output Bias Voltage 11 to 13 VDC 11 to 13 VDC

　　1.0 to 2.0 sec 1.0 to 2.0 sec

　　TEDS Feature IEEE 1451.4 IEEE 1451.4

　　ENVIRONMENTAL

　　Shock Max 1000 Gpeak 9810 m/s2

　　Vibration Max 50 Gpeak 491 m/s2

　　Operating Temperature -60 to +185 °F -51 to +85 °C

　　Seal Epoxy Epoxy

　　Base Strain Sensitivity, Max 0.002 g/µε 0.01962 m/s2/µε

　　配件

　　Supplied Accessories: model 6200, mounting stud

　　Recommended Accessories: model 4114B1 current source power unit

　　Compatible Cables: 6811A, 6812A, 6824A, 6828A, 6873A, 6925A, 6933A, 6967A, 6997A

　　订货型号

　　3583BT

　　3583AT