美国Checkline T-102-2900 涂层测厚仪 美国Checkline T-102-2900 涂膜测厚仪
美国Checkline T-102-2900 壁厚计 美国Checkline T-102-2900 涂层测厚仪
深圳市汉斯福特科技有限公司
杨工
概述
TI-CMXDLP - Black & white model
TI-CMXDLP-C - Color model
The new CHECKLINE® TI-CMXDLP is the top-of-the-line model in the CMX Series of Gauges that measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the Check-Line TI-CMXDLP automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating.
测厚仪（thickness gauge ）是用来测量材料及物体厚度的仪表。在工业生产中常用来连续或抽样测量产品的厚度（如钢板、钢带、薄膜、纸张、金属箔片等材料）。这类仪表中有利用α射线、β射线、γ射线穿透特性的放射性厚度计；有利用超声波频率变化的超声波厚度计；有利用涡流原理的电涡流厚度计；还有利用机械接触式测量原理的测厚仪等。
It features an A-Scan Display Mode allowing the user to see the actual wave form echoes, graphically, providing the insight necessary to tune the settings on the gauge for optimal performance. This is especially important on challenging measurement tasks. The TI-CMXDLP also features a new E-EV Operating Mode ("Echo-Echo-Verify"), also known as Triple-Echo Mode, which provides addition assurance that the displayed measurement is accurate and fully verified by subsequent echoes.
激光测厚仪:是利用激光的反射原理，根据光切法测量和观察机械制造中零件加工表面的微观几何形状来测量产品的厚度，是一种非接触式的动态测量仪器。它可直接输出数字信号与工业计算机相连接，并迅速处理数据并输出偏差值到各种工业设备。
X射线测厚仪:利用X射线穿透被测材料时，X射线的强度的变化与材料的厚度相关的特性，从而测定材料的厚度，是一种非接触式的动态计量仪器。它以PLC和工业计算机为核心，采集计算数据并输出目标偏差值给轧机厚度控制系统，达到要求的轧制厚度。主要应用行业:有色金属的板带箔加工、冶金行业的板带加工.
纸张测厚仪:适用于4mm以下的各种薄膜、纸张、纸板以及其他片状材料厚度的测量。
薄膜测厚仪:用于测定薄膜、薄片等材料的厚度，测量范围宽、测量精度高，具有数据输出、任意位置置零、公英制转换、自动断电等特点。
Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring).
特性
1. Wide variety of Probes, both DUAL-ELEMENT and SINGLE-ELEMENT can be used for nearly any application.
2. Auto probe recognition with Auto Zero or Manual Zero.
3. Bar graph with user-set start end values providing highest resolution around the target thickness value.
4. Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value.
5. 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification
6. Display Hi/Lo Alarm Limits with audible and visual indicators.
7. Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db).
8. Measures Coatings up to 0.100"
9. Metal housing provides strong protection against harsh environments.
10. T-8071-0868 Probe to 1"-1MHz Single-Element Membrane Probe to measure Blow Holes in Thick PE Pipes and Fittings
11. 2 Year Warranty, CE-Certified and includes NIST-Traceable Calibration Certificate.
12. IP 65 Rated
参数
| Range in Steel: | Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters)Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thick |
| Range in Coating Only Mode | 0.0005" - 0.1000" / Resolution: 0.0001"(0.013 - 2.540 mm / Resolution: 0.001 mm) |
| Max Coating | 0.100" |
| Resolution: | .001 inches (0.01mm) |
| Velocity Range: | .0492 to .3936 in./ms1250 to 9999 meters/sec |
| Units: | Inch or mm |
| Measurement Modes: | - Pulse-Echo (corrosion mode)- Pulse-Echo Coating (Corrosion w/o coating)- Echo-Echo (thru-paint)- Temp Comp (auto adjust for material temp)- Coating Only (Ultrasonic Coating Gauge) |
| Transducer Types: | Dual Element (1 to 10 MHz). |
| Output | RS-232 for upload/download of setups |
| Memory capacity: | TI-CMXDLP: over 200,000 measurements |
| Power Source: | Three 1.5V alkaline or 1.2V NiCad AA cells |
| Battery Life: | Typically operates for 150 hours on alkaline and 100 hours on NiCad |
| Auto Power off: | After 5 minutes of non-use |
| Display: | 1/8 in. VGA grayscale display 62 x 45.7mm |
| Keyboard: | Membrane switch with twelve tactile keys |
| Case: | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). |
| Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C)Material: -0 to 200° F (-20 to 100° CSpecial high temperature probes are optionally available. |
| Weight, net: | 383 grams |
| Dimensions: | 63.5 W x 165 H x 31.5 D mm |
| Warranty: | 2 year limited |
| Certification: | CE Approved, Factory calibration traceable to national standards |
超声波测厚仪:超声波测厚仪是根据超声波脉冲反射原理来进行厚度测量的，当探头发射的超声波脉冲通过被测物体到达材料分界面时，脉冲被反射回探头，通过精确测量超声波在材料中传播的时间来确定被测材料的厚度。凡能使超声波以一恒定速度在其内部传播的各种材料均可采用此原理测量。
适合测量金属（如钢、铸铁、铝、铜等）、塑料、陶瓷、玻璃、玻璃纤维及其他任何超声波的良导体的厚度。
X射线测厚仪:适用生产铝板、铜板、钢板等冶金材料为产品的企业，可以与轧机配套，应用于热轧、铸轧、冷轧、箔轧。其中，x射线测厚仪还可以用于冷轧、箔轧和部分热轧的轧机生产过程中对板材厚度进行自动控制。
涂层测厚仪F型探头可直接测量导磁材料（如钢铁、镍）表面上的非导磁覆盖层厚度（如:油漆、塑料、搪瓷、铜、铝、锌、铬、等）。可应用于电镀层、油漆层、搪瓷层、铝瓦、铜瓦、巴氏合金瓦、磷化层、纸张的厚度测量，也可用于船体油漆及水下结构件的附着物的厚度测量。
订货清单
The TI-CMXDLP is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, operating manual, Software, RS-232 output cable, RS-232 to USB adapter, software all in a foam-fitted carrying case.
配件
T-102-2900 1/4" diameter, 5.00 MHz, dual element, through-coating transducer
T-104-2900 1/2" diameter, 5.00 MHz Coating Transducer
T-104-9900 1/2" diameter, 3.5 MHz Coating Transducer
T-102-2900-H 1/4" 5Mhz Coating Transducer for Material Temp up to 300 °F (150 °C)
T-212-2001 1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer
TI-CMX-UW-50 1/2" 5 Mhz Hi Damp Coating Probe with 50 ft. underwater cable
TICC-MVX Protective Holder for TI-MVX, TI-PVX and TI-MMX-SDL
CF12 Coupling Fluid - 12oz
CF-4H High Temp Coupling Fluid 4oz (0 - 600 F / -18 to 316 C)
CF-4H-950F High Temp Coupling Fluid 4oz (600 - 950 F / 316 - 510 C)
V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)
QC2525 Shear Wave Transducer 2.25 Mhz .250" Dia
QC3725 Shear Wave Transducer 2.25 Mhz .375" Dia
QC5025 Shear Wave Transducer 2.25 Mhz .500" Dia
PQC5035 Shear Wave Transducer 3.5 Mhz .500" Dia
QC2550 Shear Wave Transducer 5.0 Mhz .250" Dia
QC3750 Shear Wave Transducer 5.0 Mhz .375" Dia
QC5050 Shear Wave Transducer 5.0 Mhz .500" Dia
QC2510 Shear Wave Transducer 10.0 Mhz .250" Dia
QC3710 Shear Wave Transducer 10.0 Mhz .375" Dia
QC5010 Shear Wave Transducer 10.0 Mhz .500" Dia
N-104-0020 LEMO 00 - Microdot Single Probe Transducer Cable, 4 foot length
QW2545 Quick Change Wedges 45° .250" Dia
QW2560 Quick Change Wedges 60° .250" Dia
QW2570 Quick Change Wedges 70° .250" Dia
QW3745 Quick Change Wedges 45° .375" Dia
QW3760 Quick Change Wedges 60° .375" Dia
QW3770 Quick Change Wedges 70° .375" Dia
QW5045 1/2"-45 Deg Angle Acrylic Wedge
QW5060 1/2"-60 Deg Angle Acrylic Wedge
QW5070 Quick Change Wedges 70° .500" Dia
T-8071-0868 1.00", 1.00 Mhz, Side, BNC, Comp
N-106-0100 BNC - LEMO 00 Single Probe Transducer Cable, 6 foot length
BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit
订货型号
TI-CMXDLP Combination Coating & Wall Thickness Gauge kit with T-102-2900 probe
TI-CMXDLP-H Combination Coating & Wall Thickness Gauge with T-102-2900-H High Temp Probe, up to 300 F (150 °C)
TI-CMXDLP-C Combination Coating & Wall Thickness Gauge kit with Color LCD and T-102-2900 probe
涂层测厚仪采用电磁感应法测量涂层的厚度。位于部件表面的探头产生一个闭合的磁回路，随着探头与铁磁性材料间的距离的改变，该磁回路将不同程度的改变，引起磁阻及探头线圈电感的变化。利用这一原理可以精确地测量探头与铁磁性材料间的距离，即涂层厚度。
相关型号
TICC-MVX
SB-Series
SB4
CF-12