美国Checkline TI-25S 壁厚计 美国Checkline TI-25S 超声波测厚仪
美国Checkline TI-25S 壁厚计 美国Checkline TI-25S 超声波测厚仪
深圳市汉斯福特科技有限公司
杨工
概述
The Check-Line TI-25S is ideal for the person that tests a few different materials regularly. The TI-25S contains 8 velocities of the most common materials (refer to complete list of Materials below) and two velocities that the user can set using a simple software program.
The tool's backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.
壁厚测量仪是进行厚度测量的主要仪器，仪器是根据超声波脉冲反射原理来进行厚度测量的，当探头发射的超声波脉冲通过被测物体到达材料分界面时，脉冲被反射回探头通过精确测量超声波在材料中传播的时间来确定被测材料的厚度。
凡能使超声波以一恒定速度在其内部传播的各种材料均可采用此原理测量。
The Checkline TI-25S comes complete, ready to use, and is protected by our 5 year limited warranty.
特性
1. Multi-function 4.5 digit liquid crystal , inches/microsecond, millimeters, and meters/second.
3. Measures from 0.025 to 6.0display with 0.500 inch numerals, backlit for use in poor light conditions.
2. Measurements displayed in inches00 inches (0.60 to 150.0 millimeters) switch to select English or metric units.
4. Four readings per second for single point measurements.
5. 8 pre-set velocities and 2 custom velocities
6. Ability to change between velocities without the use of computer software
7. IP 65 Rated
参数
| Range in Steel | 0.025-6.00" (0.60-150.0 mm) Will vary in other materials |
| Resolution | .001" (0.01 mm) |
| Velocity Range | 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec |
| Dimensions | 2.5 W x 4.75 H x 1.25 D inches |
| Display | 4½ - Digit, 0.5" Backlit LCD |
| Probe | 1/4", 7.5 MHz, actual wearface is 3/8" (10 mm)Probe P/N: T-102-3300 |
| Cable | 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
| Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C)Material: -0 to 200° F (-20 to 100° CSpecial high temperature probes are optionally available. |
| Battery Type | Two 1.5V alkaline or 1.2V NiCad AA cells. |
| Battery Life | Typically operates for 200 hours on alkaline and 130 hours on NiCad. |
| Weight | 10 ounces (283 g) |
| Accessories Included | Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty | Gauge: 5 YearsProbes: 90 Days |
超声波测厚仪是采用最新的高性能、低功耗微处理器技术，基于超声波测量原理，可以测量金属及其它多种材料的厚度，并可以对材料的声速进行测量。可以对生产设备中各种管道和压力容器进行厚度测量，监测它们在使用过程中受腐蚀后的减薄程度，也可以对各种板材和各种加工零件作精确测量。
本测厚仪采用脉冲反射超声波测量原理，适用于超声波能以一恒定速度在其内部传播,并能从其背面得到反射的各种材料厚度的测量。此仪器可对各种板材和各种加工零件作精确测量。可广泛应用于石油、化工、冶金、造船、航空、航天等各个领域。
订货清单
The TI-25S is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, PC-based Software, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.
配件
TICC-M Protective Holder for Most TI Series Gauges
CF12 Coupling Fluid - 12oz
V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)
T-102-3300 1/4" diameter, 7.5 MHz, dual element transducer (Standard Probe for TI-25S)
DATACOMM PC Program to download Custom #1 & Custom #2 calibrations to TI-25S (N-306-0010 cable must be ordered)
N-306-0010 6 foot RS232 Cable (DB-9 to Lemo 2 pin)
BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit
订货型号
TI-25S Ultrasonic Thickness Gauge Kit with T-102-3300 Probe
由于超声波处理方便，并有良好的指向性，超声技术测量金属，非金属材料的厚度，既快又准确，无污染，尤其是在只许可一个侧面可按触的场合，更能显示其优越性，广泛用于各种板材、管材壁厚、锅炉容器壁厚及其局部腐蚀、锈蚀的情况，因此对冶金、造船、机械、化工、电力、原子能等各工业部门的产品检验，对设备安全运行及现代化管理起着主要的作用。
相关型号
SB-Series
SB4
TICC-M
CF-12
V-Block