深圳市汉斯福特科技有限公司
杨工
概述
Measuring Range
0.040 - 6.00 inches
1.00 - 150.0 mm
The Check-Line TI-25LT Ultrasonic Steel Thickness Gauge accurately measures steel thickness and the extent of corrosion - from only one side!
Standard configuration: In its standard configuration, the Check-Line TI-25LT is factory set to MEASURE STEEL ONLY
Optional configuration: As a “no cost” option, the TI-25LT can be factory set to measure on stainless steel.
超声波测厚仪是采用最新的高性能、低功耗微处理器技术，基于超声波测量原理，可以测量金属及其它多种材料的厚度，并可以对材料的声速进行测量。可以对生产设备中各种管道和压力容器进行厚度测量，监测它们在使用过程中受腐蚀后的减薄程度，也可以对各种板材和各种加工零件作精确测量。
本测厚仪采用脉冲反射超声波测量原理，适用于超声波能以一恒定速度在其内部传播,并能从其背面得到反射的各种材料厚度的测量。此仪器可对各种板材和各种加工零件作精确测量。可广泛应用于石油、化工、冶金、造船、航空、航天等各个领域。
特性
1. Includes NIST-Traceable Calibration Certificate
2. Resolution of 0.004 inch (0.01 mm)
3. Large, backlit LCD display retains last reading
4. Simple operator controls virtually eliminate training
5. Special-purpose probes are offered for a variety of applications
6. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
7. Switch-selected units for inches or mm
8. For underwater surveying, probe cable lengths up to 50 feet are optionally
9. The TI-25LT probe is waterproof and can be submerged in water
10. CE Certified
11. Made in the USA with 5-Year Warranty
12. IP 65 Rated
参数
| Range in Steel | 0.040-6.00" (1.00-150.0 mm) |
| Resolution | .004" (0.01mm) |
| Display | 4½ - Digit, 0.5" Backlit LCD |
| Velocity Range | .0787-.3937 in/µs(2000-10,000 m/sec) |
| Probe | 1/4", 5 MHz, actual wearface is 5/8" (17mm) |
| Probe Wearface | PEEK (Polyethylethylkytone) |
| Cable | 4ft. (1.2m) waterproof cable with non-polarized, quick-disconnect connectors. Op |
| Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C)Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available |
| Battery Type | Two AA batteries |
| Battery Life | 200 hours |
| Weight | 710 ounces (280g) |
| Dimensions | 2.5 x 4..5 x 1.25"(64 x 114 x 32mm) |
| Accessories | Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty | Gauge: 5 YearsProbes: 90 Days |
由于超声波处理方便，并有良好的指向性，超声技术测量金属，非金属材料的厚度，既快又准确，无污染，尤其是在只许可一个侧面可按触的场合，更能显示其优越性，广泛用于各种板材、管材壁厚、锅炉容器壁厚及其局部腐蚀、锈蚀的情况，因此对冶金、造船、机械、化工、电力、原子能等各工业部门的产品检验，对设备安全运行及现代化管理起着主要的作用。
超声清洗与超声波测厚仪仅是超声技术应用的一部分，还有很多领域都可以应用到超声技术。比如超声波雾化、超声波焊接、超声波钻孔、超声波研磨、超声波液位计、超声波物位计、超声波抛光、超声波清洗机、超声马达等等。超声波技术将在各行各业得到越来越广泛的应用。
声波钻孔、超声波研磨、超声波液位计、超声波物位计、超声波抛光、超声波清洗机、超声马达等等。超声波技术将在各行各业得到越来越广泛的应用。
订货清单
Complete Kit includes: Gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case.
配件
TICC-M Protective Holder for Most TI Series Gauges
CF12 Coupling Fluid - 12oz
V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)
SB4 4 Step Steel Test Block, 0.1 / 0.2 / 0.4 / 0.6 inch - Uncertified
T-102-2000 1/4" diameter, 5.00 MHz, dual element transducer (Standard Probe for TI-25LT)
超轻超薄机身，便于单手操作
两点校准功能，使得测量值更为准确
独有蓝色背景灯光，各种环境下清晰可视
低功耗，两节干电池可使用200小时以上
适合测量所有导声材料，如钢、铁、塑料、陶瓷、有机玻璃等
订货型号
TI-25LT Steel Only Ultrasonic Thickness Gauge Kit with T-102-2000 Probe
TI-25LT-SS Stainless-Steel Only Ultrasonic Thickness Gauge Kit with T-102-2000 Probe
相关型号
SB-Series
SB4
TICC-M
CF-12
V-Block
TI-25UW-50