| Jean printing paste 咨询谢燕红 12 |
| State | Paste |
| Packing | 25KG/drum for white, 20KG/drum for clear |
| Storage | 6 months in cool place |
| Suitable for jean, nylon, TPU, PU etc. |
| Features | 1. Stone washing、snow washing、poaching、ferment washing、acid-washing,thermophilic digestion resistance.2. Extra fastness3. SGS detecting passed, no PVC, no heavy metal, no NPEOs |
| Mix proportion | Light: White printing paste 70-80% + Clear printing paste 20-30% + pigment ?% + fixing agent 3%Deep: White printing paste 20-30% + Clear printing paste 70-80% + pigment ?% + fixing agent 3% |
| Printing process | 1. Printing with clear printing paste for 1-2 times2. Mixing with white printing paste, clear printing paste, pigment and stirring them evenly.3. Printing again for 3-4 times (3-4 scrapes per time).4. Drying it in room temperature, or baking for 1-3 minutes under 150-180℃5. Finish. |
| Attentions | 1. Please drying the paste surface with cold air each time before re-printing.2. The pigment is max 12%, otherwise it’ll be easily faded.3. 1-3% curing agent is suggested to make better washing ability. |
| 品名 | 特强石磨牛仔浆 咨询谢燕红 12 |
| 外观 | 糊状 |
| 包装 | 白胶浆25KG/桶，透明浆20KG/桶 |
| 贮存期 | 常温下6个月 |
| 应用 | 牛仔布（涂层布，压光布除外）, 尼龙布，也可用于TPU、PU等皮革等 |
| 卖点 | 1. 耐强石磨洗、雪花洗、漂洗、酵素洗、酸洗、耐高温蒸煮、蓝天白云等2. 不粘手超柔软，高亮度3. 符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求 |
| 调配比例 | 印浅色:牛仔白胶浆70-80% + 牛仔透明浆20-30% + 固化剂3% + 色种？%印深色:牛仔白胶浆20-30% + 牛仔透明浆70-80% + 固化剂3% + 色种？% |
| 工艺流程 | 1. 丝网选用80-100目，用丝印硬方刀75度刮印, 以透明浆打底1-2次2. 将白胶浆，透明浆，色种，固化剂搅拌匀印2-3次3. 24-48小时自然干燥，或150-180度焙烘1-3分钟 |
| 注意事项 | 1.加入固化剂的石磨胶浆必须在4~8小时内用完 2.每色第一板必须用力刮4~6刀(浆体充分进入纤维深处才能确保特强牢固度)!3.固化剂比例必须准确并充分搅拌均匀!4.必须保证浆层完全干透才能进行洗水! 咨询谢燕红 12 |