Descriptions
Description:
Install the lock by yourself
Before installation:
1.Check all the accessories and the four remote controllers.
2.Check whether the lock is in accordance with the door.
3.Check the condition of the door, for instance, the materials, shape and surface etc.
4.Measure the installation place.
5.Clean up the installation place.
The Methods of Lock Installation and Uninstallation
1.Install the lock in accordance with the materials of the doors, including wood door and iron door.
2.The installation on the wood door: tear off the double side tape on the fixation board and lockpin. Chose the installation place, and paste the lock on the door. Make sure the flexible operation, and use the pencil to mark the 4-5 hole site on the fixation board. Then use the wood bolts to fasten the fixation board and install the lock on it, and fasten the lockpin on the door frame. Finally, check the flexibility of the lock and tighten the wood bolts up.
3.The installation on the iron door: the steps are similar to that of wood door. The main difference is to use 4*10 stainless steel rivets instead of wood bolts. After mark on the door, use drill 4 to process through holes, and use rivet gun to fix rivet on every hole.
1.The Unistallation Methods: for wood door, uninstall the wood bolts; for iron door, uninstall the rivet by using electric hand drill or file.
Notice: because self-installation cannot guarantee the quality, therefore our company suggests not to install by yourself. And we supply technicians to install the lock.
The setting steps of remote controllers and locks:
1.Open the battery cover;
2.The middle part of the left battery jar has a setting key;
3.Press the setting key for about 2 seconds;
4.The LED lamp will shine with ticking voice;
5.Press every remote controller a second until it has ticking voice;
6.Press the setting key a second, until it has ticking voice;
7.Test whether the remote controller can work appropriately;
8.If anyone of them cannot work, reset it as the above steps.
Resetting methods of remote controllers and locks:
1.If you lose a remote controller, please reset by using other remote controllers.
2.Resetting by following the above steps.
3.After resetting, the lost controller will lose efficacy, and you can use the newly reset controller.
Notice: unless you lose the remote controller or buy a new one, otherwise do not press the resetting key, because it will delete all the data.
The Inspections and Adjustments:
After installation, please make sure that the remote controllers are valid in the condition of someone indoor (check it indoor and outdoor). Check the following steps:
1.The conveying distance of the remote controllers’ signal.
2.The best location for remote controllers to receive and dispatch electric wave.
3.Adjust the antenna direction (keep a 90 angle to the lock is the best place generally, but different situations differ);
4.Check whether the signal voice is normal when you open or lock the door.
The Signal Voice of Open and Lock the Door:
1.Press the “lock” key, you will hear a single beep voice, which means the door is locked.
2.Press the “open” key, you will hear three beep voice, which means the door is open.
Automatic Unlocking:
1.One reason is unqualified installation or failed operation, and the lock will unlock automatically with warning voice. Test whether the key cylinder is workable. If you cannot solve the problem, please call the company.
2.The other reason is low battery, which require you to switch the battery and make sure your safety.
Manual Emergency Unlocking Lockpin:
The door can be opened unlocked manually, so that it can be used safely in some emergencies like fire disaster.
Lock Door Key:
Design of the lock body involves the indoor lock button (when it needed to be locked indoor, it does not need to use the remote control to close the door,but can push a button on the host,to lockedit)
Power Supply Choice:
1.Two AA alkaline batteries (3V).
2.DC5V/1000Ma
The two supply powers can provide electricity at the same time or individually. When both two AA alkaline batteries and DC5V/1000Ma exist, the lock will choose DC5V/1000Ma automatically. If it is cut off, the lock will use the two batteries electricity. So the lock will never become outage and that is the power-off protection.
Replace Battery Reminder:
1.In low battery condition, the lock will make some voice with light to remind you to replce the batteries, but it can use for about one month.
2.If the electric quantity continually reducing, the door will warn you to replce battery immediately and cut off the unlocking func