喷漆时，外部空气经过初级过滤网过滤后由风机送到房顶，再经过顶部过滤网二次过滤净化后进入房内。房内空气采用全降式，以0.2-0.3m/s的速度向下流动，使喷漆后的漆雾微粒不能在空气中停留，而直接通过底部出风口被排出房外。

　　When the paint is painted, the external air is filtered through the primary filter net and the fan is sent to the roof by the fan, and then through the top filter net for two filtering and purifying into the room. The air in the room is fully downloaded and flows down at the speed of 0.2-0.3m/s, so that the paint mist particles after spraying can not stay in the air, but directly discharged through the bottom outlet.

　　这样不断地循环转换，使喷漆时房内空气清洁度达98%以上，且送入的空气具有一定的压力，可在车的四周形成一恒定的气流以去除过量的油漆，从而最大限度地保证喷漆的质量。

　　In this way, continuous air cycle conversion makes the air cleanliness of the paint room more than 98% when the paint is painted, and the incoming air has certain pressure. A constant air flow is formed around the vehicle to remove excess paint, so as to ensure the quality of the painting.

　　烤漆时，将风门调至烤漆位置，热风循环，烤房内温度迅速升高到预定干燥温度(55℃—60℃)。

　　When the paint is used, the air door is transferred to the paint position, the hot air circulate, the temperature in the roast room rises quickly to the predetermined drying temperature (55 - 60).

　　风机将外部新鲜空气进行初过滤后，与热能转换器发生热交换后送至烤漆房顶部的气室，再经过第二次过滤净化，热风经过风门的内循环作用，除吸进少量新鲜空气外，绝大部分热空气又被继续加热利用，使得烤漆房内温度逐步升高。

　　Fan outside fresh air early after filtration, gas chamber heat exchange is sent to the roof with baking heat energy converter, and then after second times of filtration and purification, hot air after air circulation within the role, in addition to small amounts of fresh air, most of the hot air and continue to be heated by the temperature gradually increased, paint room in.

　　章丘市同盛涂装设备厂

　　E-mail:dongshenzi@163.com

　　诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家！