一、环境对喷烤漆质量的影响不可忽视.由于烤漆房对现场要求非常严格,现场温度应控制在15℃-35℃,湿度35%-75%,烤漆房应采用密封式,所有进入烤漆房的空气应经过专用设备过滤,以保证空气无粉尘、颗粒及其他杂质.

　　The influence of environment on the quality of the paint can not be ignored. Because the paint room on the scene very strict requirements, the temperature should be controlled at 15 DEG -35 DEG 35%-75%, humidity, paint room should be sealed, all into the baking room air through the special equipment to ensure air filtration, no dust, particles and other impurities.

　　二、涂料的选用.涂料应严格按照工艺要求选用.同一生产厂家、同一批次涂料、涂料的颜色、外观和漆膜机械强度应满足产品设计要求.涂料在运输过程中由于方法不当会出现透明度差、浑浊、沉淀等现象;同时由于溶剂挥发,使用不当及氧化聚合等反应使黏度增高。

　　Two, selection of coatings. Coatings should be strictly in accordance with the process requirements. Use the same manufacturer, the same batch of paint, paint color, appearance and mechanical strength of paint film should meet the requirements of product design. The coating in the transport process because the method leads to poor transparency, turbidity and precipitation phenomenon; at the same time as the solvent the improper use and oxidation polymerization reaction to high viscosity.

　　也可能因颜料及体质颜料膨胀,使漆基与颜料之间反应,黏度变的特别高,严重时呈豆腐泡状.这样,涂料失去了流动性,使用后漆膜表面粗糙,结合力差,容易脱落.

　　It may also be due to the expansion of pigment and physical pigment, so that the reaction between the paint and the pigment is very high, and the viscosity becomes very high. When it is serious, it appears bean curd bubbles. This way, the paint loses its fluidity, and the surface of the paint film is rough and the binding force is poor, so it is easy to fall off.

　　章丘市同盛涂装设备厂

　　E-mail:dongshenzi@163.com

　　诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家！