1、明亮度，烤漆房内明亮度需达到800—1000勒克司，而且需要使用接近D65光源的灯光，同时房内墙壁应为哑光白色；

　　1, brightness, brightness all the paint room should reach 800 - 1000 lux, and require the use of D65 light source close to the light, and the walls of the room should be matte white;

　　2、空气流量；

　　2. Air flow;

　　3、过滤效果，这要看烤漆房顶棉的型号，一般修理厂使用的有EU5和EU6两个型号，可以在使用烤漆房时在房内用太阳灯照射上部，通常每平方米极细小灰尘应小于5颗；

　　3, it depends on the filtering effect, thepaintroofcotton model, general repair factory use EU5 and EU6 two models, can be used in paint room in the room with the upper sunlamps irradiation, usually per square metre of extremely fine dust should be less than 5;

　　4、墙壁密封效果，烤漆房必须是密封的，而且在接缝处不应有漆尘的积聚；

　　4, the wall sealing effect, the baking paint room must be sealed, and there should not be the accumulation of paint dust at the seam.

　　5、保证正压，烤漆房的进风量应略大于出风量，使烤漆房保持在正压的状态下；

　　5. To ensure positive pressure, the air intake of the lacquer room should be slightly more than the air volume, so that the paint room is kept in the state of positive pressure.

　　6、加热系统的密封效果，在燃烧器和烟筒周围应密封良好，不可出现燃烧后的油灰；

　　6, the sealing effect of the heating system, good seal should be around burner and chimney, there will be no putty after burning;

　　7、升温速度，烤漆房从20℃升至60℃所用的时间大约是l0—l5min，同时应注意有些烤漆房的温度计不准，测量温度时要以烤漆房内金属车身的温度为准。

　　7, heating rate, the time of baking paint room from 20 to 60 degrees is about l0 l5min. At the same time, it should be noted that some of the paint room thermometer is not allowed. When the temperature is measured, the temperature of the metal body in the paint room shall be the standard.

　　章丘市同盛涂装设备厂

　　E-mail:dongshenzi@163.com

　　诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家！