| Category类别 | Trade-Mark牌号 | Equivalent to China Standard相当国标 | Characteristics & application特性和用途 | Equivalent to AWS相当AWS |
| Hard-surfacing硬面 堆 焊 | D 667 | EDZCr-B-15 | HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.HRc≥48，耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件 | |
| D 802 | EDCoCr-A-03 | HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.HRc38-47，耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃 | ECoCr-A |
| D 812 | EDCoCr-B-03 | HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.HRc45-50，耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀 | ECoCr-B |
| D 822 | | HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.HRc≥53，耐热、耐磨，但抗冲击性差。堆焊锅炉旋转叶轮 | |
| D 832 | EDCoCr-C-03 | HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.HRc≥50，耐热、耐磨。堆焊高温工件如热轧导轨 | ECoCr-C |
| D 842 | EDCoCr-D-03 | HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.HRc28-38，耐蚀、抗热疲劳，具有加工硬化性。堆焊热锻模 | |
| Cast iron 铸 铁 | Z 308 | EZNi | Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.纯镍，综合性能好。铸铁薄件及加工面补焊用，如机床导卫 | ENi-Cl |
| Z 408 | EZNiFe | Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.镍铁，强度高、塑性好。重要灰铸铁及球铁焊补用，如汽缸盖 | ENiFe-Cl |
| Z 508 | EZNiCu-1 | Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊 | ENiCu-B |
| Copper alloys 铜 合 金 | Cu 107 | ECu | Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.紫铜，耐大气，海水腐蚀，导电性好。紫铜焊接用，如导电铜排 | ECu |
| Cu 207 | ECuSi | Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用 | ECuSi |
| Cu 227 | ECuSnB | Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.锡磷青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用 | ECuSn-C |
| Cu 237 | ECuAl | Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊用 | ECuAl-A2 |
| Aluminum alloys 铝合金 | Al 109 | TAl | Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.纯铝，耐蚀性好，但强度不高，纯铝焊接用 | E1100 |
| Al 209 | TAlSi | Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金 | E4043 |
| Al 309 | TAMn | Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.铝锰，强度高，耐蚀。铝合金焊接用 | E3003 |
| Nickel alloys镍合金 | Ni 102 | ENi-1 | Pure nickel. Welding and surfacing of nickel and nickel to steel.纯镍，用于镍、镍与钢的焊接与堆焊 | ENi-1 |
| Ni 207 | ENiCu-7 | Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.镍铜，用于镍铜、镍铜与钢的焊接与堆焊 | ENiCu-7 |