Resolution: 1MM
Accuracy: + 1% FS
Display: Chinese LCD display date and time, the measured value, historical trend lines, etc.
Setting the scene: button to complete by this machine
Calibration: Factory calibrated, field calibration
Output (optional)
Analog output signal: 0 ~ 20mA; 4 ~ 20mA load <300Ω; 0 ~ 5V; 0 ~ 10V
Digital Output: RS485 (supports Modbus)
Relay outputs: 4 Group Control Relay Output
Relay capacity: 5A, 250VAC
Powered by
AC power supply: AC220V
DC power supply: DC24V
Physical Characteristics
Transmitter dimensions: 230 * 185 * 120mm
Sensor Size: Φ64 * 85
Host Material: Aluminum; Sensor: Stainless Steel
Transmitter Weight: 1975g
Sensor Weight: 400 ~ 800g
Connection: 4 exceptionally pipe thread
Sensor cable: shielded cable 10M
Environmental Performance
Protection class: IP65 (transmitter)
IP68 (sensor)
Working temperature: Transmitter: -20 ~ 70 centigrade
Sensor: 0 ~ 70 centigrade
Relative humidity: 100%
Working pressure: Max 7.5Bar
Works
Submerged ultrasonic sensor sends a bouquet to the underwater ultrasound, ultrasound during the downward propagation, the encounter was suspended and precipitated sludge will be reflected back and sludge layers of different densities reflected signal strength is different. Instrument by detecting the reflected ultrasound signal intensity and time, and after treatment, you can get the depth or thickness of sludge interface.
Site installation
Muddy water interface meter sensor probe and the surface must be kept vertical installation.
Muddy water interface meter sensor probe should be between the bottom and no other solid block, otherwise it will interfere with the signal.
Muddy water interface meter sensor probe should be avoided by the impact of floating debris in water, suspended solids in water easily if the probe surface adhesion, it is recommended to install self-cleaning system to keep the probe surface clean.
Recommended probe immersion depth of about 20cm, the probe away from the wall least 30cm.