石英手表测试仪，石英钟校表仪QTEST6000由深圳市智慧源电子有限公司提供；
石英手表测试仪，石英钟校表仪QTEST6000目前应用于钟表与计时器界广、功能强的利器，运用的范围非常的广泛，例如用作石英晶体、指针式石英钟表、数字式石英钟表等的准确度测试；此外，它还可以测量马达线圈，灯阻，消耗电流与消耗功率，以及检测钟表内IC等等，并内附有可调电源0---6V，这些可使您检修测试及生产时非常方便。
Combined Instrument for Quartz and Mechanical Watches
This combined measurement and test instrument associates all functions of test equipments for quartz watches and test equipments for mechanical watches.It is the ideal test instrument for the repair service,the lab and watch sales outlets.Basic functions and measurement sequences,largely automated,provide a fast and efficient operation.
Additional measurement modes provide a way to measure watches with special escapements.The instrument,based on the"all-in-one"concept,only requires a very small work area.
This machine provide total 9 kinds of instruments and 15 testing and examining functions for you.
Functions:
1)quartz watch,tuning fork and mechanical watch rate testing
A: test by 32.768KHZ Quartz crystal oscillation electric signal
B: test by LCD capacitance signal
C: test by Stepper motor magnetic field signal
D: test by Mechanical vibration signals
E: test by A tuning fork signal
F: test by current signal
2)Current consumption measurement
G:ampere meter(milliammeter/microammeter)
3)Starting voltage measurement
H:SPC adjustable dc power supply
4)Resistance measurement,Short-circuit and open-circuit testing
I: test resistance
J:test short/open circuit
5) Pulse generator
K: stepping motor testing by pulse generator
6)Alarm testing
L:test buzzer
7)Battery testing
M:voltmeter (voltage of high/low consumption)
8)Programmer
N:special IC programming
9)Countdown timer
O:countdown watch
其线路不变，只是将原来线路上的石英表取下来，在原来石英与电路上的连接点AA/引出两条线，分别接到测试石英的两个插脚，接上电源即可。引线到被硝石英插座，只要将被石英插入插座，看看电子表有无数字显示，如有数字显示，则表示该石英有振荡输出，石英工作正常。若无数字显示，则表示石英无振荡产生，石英失效。这种手表检验方法简便，快捷而实用，缺点是不能显示出石英振是否在额定的范围内石英表振要在频率显示仪上才能看出。
用万用表检验电子表，万用表是电工、电讯工程最常用的仪表。万用表各档可分别测童直流电流、直流电压、交流电压、交流电流、直流电阻等。将红表笔插入标有“+’号的插座，黑表笔擂入标有“-”号的插座。根据所要进行的测量内容选择对应的档位。目前，我们常用的万用表有三种型号OS831, CMT-3002, YX360TR，它们均有四个档位，分别为直流电压档位(Dc,V),直流电流档位(DcA),欧姆档位和交流电压档位(Ac,V)。
使用电子校表仪，校仪器必须接稳压电源，微音器须远离日光灯、电动机和嗓音，校仪器不要靠近热源(如暖气)和受日光曝晒，先将电源擂销接上，然后再打开仪器电源开关，仪器应接上地线。第一次的侧量显示可能不准确，因此要重复侧2-3次