Online PCBA brush cleaning machine equipment technical specifications

　　Cleaning process model feeding + + rinse rinse on cutting + + clean + wind under the infrared hot air drying all +.

　　Meet the requirements of J - STD001D cleanliness requirements, to ensure the process after the anti-corrosion paint coating requirements.

　　Specific indicators: 20 times in microscope detection without apparent flux residues (according to the IPC A610D);

　　cleaner Water-based environmentally friendly cleaning agent.

　　Deionized water drift lotion.

　　PCBA cleaning size effectively The biggest L450xW420xH70mm cleaning.

　　PCBA width range 50-420 - mm.

　　PCBA CARDS substrate thickness 1-3 mm.

　　Transmission speed requirements (capacity) speed (800-1500) mm/Min. The stepless adjustable.

　　About L2820xW1200xH1300mm machine size.

　　Machine net weight < = 1000 kg.

　　The transmission way Adopt wave furnace card plate transmission way, driving speed stepless adjustable.

　　Clamping way According to the PCB width stepless adjustable, range 50-500 - mm; When cleaning, stable clamping, out board, not string.

　　Roller brush cleaning trough Use water-based environmental protection cleaner, loop filter is used; Equipped with a filter, reducing wear and tear.

　　Cleaning roller diameter of 80 mm.

　　Cleaning cycle reservoir reservoir capacity 30-40 l.

　　Cleaning fluid temperature 40 to 60 ℃.

　　10 um filtration precision.

　　Brush height adjustment After using aging guarantee brush, height can be adjusted up and down automatically 0 to 50 mm, prolong the service life of brush, saving the cost of consumables.

　　Roller brush rinse tank Using deionized water rinse, loop filter is used; Reduce the wear and tear.

　　Cleaning brush roller diameter is 80 mm.

　　Rinse cycle reservoir reservoir capacity 30-40 l.

　　Cleaning fluid temperature 40 to 60 ℃.

　　10 um filtration precision.

　　Brush height adjustment After using aging guarantee brush, height can be adjusted upward 0 to 10 mm, adopts automatic adjustment method, prolong the service life of brush, saving the cost of consumables.

　　The wind knife wind and water Following with the wind knife water, to guarantee the effective removal of surface water droplets, in order to dry.

　　Dry heat Infrared heating up and down the wind circulation drying, the temperature is 50-90 ℃, the temperature is adjustable, ensure the PCB after washing and dry, no water, meet the requirements of the test process.

　　Exhaust system Exhaust air interface, and a waste gas filtration unit, can be replaced periodically activated carbon. Will be volatile gas equipment in filtering out, ensure that do not contain harmful gas discharge gas.

　　Effluent discharge set addition, drainage duct, brings together from the waste liquid can be closed to eduction.

　　Watch window set observation window, facilitate observation.

　　The equipment material Airframe adopt shell plastic-sprayed surface treatment, the tank material is made of stainless steel machine, aluminum and other materials; Ensure a durable, corrosion resistance to acid and alkaline liquid.

　　Equipment structure appearance structure appearance beautiful, precision, convenient maintenance, maintenance, provide convenience for emergency.

　　Power supply AC380V / 50 hz.

　　Power is < = 22 kw.

　　Control instrument panel control. All electrical, heating system, it is a separate switch status is displayed on the control panel.

　　Safety monitoring state all automatic monitoring, including liquid level, temperature and related process parameters such as comprehensive monitoring, make the equipment in a state of stable working process. Equipment has a good grounding device; The equipment has the emergency shutdown and alarm system; In addition to electrostatic equipment.