详细说明
HEIDENHAIN测头\ 测量工件
上海兆茗电子科技有限公司优价销售HEIDENHAIN测头、HEIDENHAIN测量工件、HEIDENHAIN测量刀具。
HEIDENHAIN测头
HEIDENHAIN海德汉的测头设计用于机床，特别是铣床和加工中心。能帮助用户降低单件和小批量以及中等批量生产成本。它使数控机床可以自动执行设置、测量和校验任务，并且大多数数控系统还能在程序控制下执行这些任务。
HEIDENHAIN测量工件
当TS三维触发式测头的探针接触到工件表面时它将偏离其自由位置。偏离自由位置时立即通过电缆（TS 220/TS 230型）或红外线（TS 640/TS 440型）向数控系统发送信号。数控系统立即将机床轴光栅尺所测的实际位置信息保存下来，用于进一步处理。
HEIDENHAIN测量工件
型号:TS 260/TS 460、TS 440/TS 444、TS 640/TS 642/TS 740、TS 220/TS 230、TS 249、SE 660、SE 540/SE 640/SE 642
HEIDENHAIN海德汉 TS 触摸对铣削加工的工件测量探头、 钻、 镗床和加工中心都是各种版本中可用:
| Machine type | CNC milling machine |
| Signal transmission | Radio | Infrared | Infrared | Infrared | Infrared | Infrared |
| Switching on/off | Radiosignal | Infraredsignal | Infraredsignal | Infraredsignal | Infraredsignal | Infraredsignal |
| Range | 15 m | 7 m | 3 m | 7 m | 7 m | 7 m |
| Proberepeatability | 2 σ ≤ 1 µm |
| Transmitter/receiver units | SE 660 | SE 540, SE 64x, SE 660 | SE 540, SE 64x | SE 540, SE 64x | SE 540, SE 64x, SE 660 | SE 540, SE 64x |
| Power supply | Batteries, rechargeable or nonrechargeable | Compressed air through spindle | Batteries, rechargeable or nonrechargeable |
| Max. operating time | 400 h | 400 h | Compressed air for approx. 3 seconds = 2 minutes of probing | 800 h | 800 h | 500 h |
| Dimensions (diameter) | 40 mm | 40 mm | 54 mm | 72 mm | 72 mm | 72 mm |
| Collision protection | Option | Option | – | – | – | – |
| Deflection force | Axial: 8 N Radial: 1 N | Axial: 7 N Radial: 1 N | Axial: 8 N Radial: 1 N | Axial: 0.6 N Radial: 0.2 N |
| Model | TS 460 | TS 444 | TS 640 | TS 642 | TS 740 |
| Machine type | CNC milling machine | Grinding machine | Grinding machineMilling machine |
| Signal transmission | Cable | Cable | Cable |
| Proberepeatability | 2 σ ≤ 1 µm | 2 σ ≤ 1 µm | 2 σ ≤ 1 µm |
| Power supply | 5 V | 15 V to 30 V | 15 V to 30 V |
| Deflection force | Axial: 8 N Radial: 1 N | Axial: 7 N Radial: 0.7 to 1.3 N | Axial: 7 NRadial: 0.5 N |
| Model | TS 220 | TS 249 | TS 260 |
HEIDENHAIN测量刀具
TT 140型触发式测头用于测量刀具。测量静止或旋转刀具时，接触盘偏离自由位置时向数控系统发出触发信号
HEIDENHAIN测量工具\刀具
型号:TT 140、TT 160/TT 460、TT 449、TL Nano、TL Micro 150/200/300、DA 301 TL
刀具测量机上的缩短了非生产性时间，提高了加工精度和减少机械加工零件的返工和报废等。与触觉 TT 触摸探头和无接触 TL 激光系统，海德汉提供工具测量两个完全不同的可能性。
| TT touch probes | | |
| Probing method | Physical probing | | |
| Probing directions | 3-dimensional: ±X, ±Y, +Z | | |
| Probing forces | Axial: 8 N, radial 1 N | | |
| Tool materials | Breakage-prone teeth are at risk | | |
| Sensitivity to unclean tools | Very small | | |
| Possible measuring cycles | Length, radius, breakage, inpidual teeth | | |
| Installation effort | Simple connection to NC control | | |
| Signal transmission | Cable | | Infrared to SE | |
| Repeatability | 2 σ ≤ 1 µm | | |
| Model | TT 140 | TT 160 | TT 449 | TT 460 |
| | TL laser system |
| Probing method | Non-contacting by laser beam |
| Probing directions | 2-dimensional: ±X (or ±Y), +Z |
| Probing forces | No forces, operates without contact |
| Tool materials | Any |
| Sensitivity to unclean tools | High (tool must be cleaned with blown air before measurement) |
| Possible measuring cycles | Length, radius, breakage, inpidual teeth, tooth geometry (also for combined contours) |
| Installation effort | PLC adaptation in the NC control necessary (6 outputs, 3 inputs), compressed air connection |
| Signal transmission | Cable |
| Repeatability | 2 σ ≤ 0.2 µm | 2 σ ≤ 1 µm |
| Min. tool diameter | 0.03 mm | 0.1 mm |
| Max. tool diameter | 37 mm 2) | 30 mm 2) | 80 mm 2) | 180 mm 2) |
| Model | TL Nano | TL Micro 150 | TL Micro 200 | TL Micro 300 |