EBFD-60倾斜开关吊在料斗内，随着投入物料的增加，当开关部分倾斜约17度时，料流内部的开关为就会动作并输出接点信号。倾斜开关铸铁结构，耐磨性较强而且牢固，广泛用于检测散状物料（如粉体、粒体、块体）料仓或中转料槽的上限料位。

　　·动作角度约17度

　　·接点构成常闭接点

　　·接点容量  24VDC/220 VAC

　　·保护等级    IP67

　　·外壳:铸铁结构，表面镀镍铬合金

　　型号:ST-20、ST-20P、20-39、20-39-25、HNST-KG、MFFP20-30

　　EBFD-60倾斜开关采用万向接点开关，  不受方向限制，环氧树脂浇封，结构呈圆柱型，使用时用户可根据所确定的位置，将本装置悬挂在料仓或料场的上方，初始位置垂直于水平面，当物料的高度达到受控位置时，则挤压料位计使之倾斜，当倾斜角度大于15-30度时，开关动作，由常开转为常闭或由常闭转换成常开接点，用户将开关线路接至控制室内，即可控制料位高度。

　　倾斜开关技术参数

　　标准型ST-20 20-39 20-39-25、KBC-220

　　1、额定触点:24V/220VAC/2A

　　2、额定温度:-20～100℃（可订制200℃）

　　3、外壳材质:不锈钢

　　4、电缆长度:6000mm（可以订制）

　　5、探头长度:180mm

　　6、探头总长:210mm

　　7、尾部连接螺纹:M20×1.5×50

　　8、产品重量:1.2kg

　　ST-20P轻型

　　1、额定触点:24V/220VAC/2A

　　2、额定温度:-20～100℃（可订制200℃）

　　3、外壳材质:工程塑料

　　4、电缆长度:6000mm（可以订制）

　　5、探头长度:195mm

　　6、探头总长:230mm

　　7、尾部连接螺纹:M20×1.5×50

　　8、产品重量:0.7kg

　　典型应用

　　料流检测堵料检测料位/液位检测

　　安装时使用钢索悬挂产品，应使电缆保持松弛。

　　产品特点

　　结构简单、坚固、抗腐蚀

　　耐磨损性强的上限料位开关

　　防护等级IP67

　　可单独使用探头，也可配合控制装置使用

　　内藏全金属外壳水银开关

　　技术规格

　　动作角度:大约20度

　　接点容量:100V AC0.5A 24V DC1A

　　输       出:NC*1

　　检测距离:距安装位置5M（Max）

　　防护等级:IP67

　　环境温度:-20℃~+80℃

　　EBFD-60倾斜开关用于检测稳定状态下的粉状、粒状、块状的储藏物的上限料位及溜槽堵塞。垂直悬挂的倾斜开关探头在受到外力作用且偏离垂直位置20 度时，开关内部的水银开关触点动作，常闭触点断开。当外力撤销后，倾斜开关回复到垂直状态，内部开关触点复又闭合。利用倾斜开关内触点开合的变化来判断设备的工作状况，以便及时采取措施来达到安全保护的目的。

　　EBFD-60倾斜开关是电厂用的一种煤位料位的检测开关、引进国外进口技术生产是一种结构简单、使用方便、安全可靠的料流、料位检测器。体积小、安装容易，坚固且抗腐蚀。用途:溜槽或转接处堵塞探测器；输送机皮带跑偏探测器；翻车机卸料探头；用于皮带和振动给料机缺料或无料探测。

　　本公司还生产以下产品:

　　Ramsay TILT SWITCH倾斜开关20-39-25、21-39、20-41

　　拉姆齐料位开关20-39-25、拉姆齐料位计20-39-25

　　倾斜开关、料位计ST-20、ST-20P、ETS-9、水银开关、煤流开关

　　水银料位开关ST-20、20-39、HNST-KG、MFFP20-30

　　The ebfd-60 tilt switch is suspended in the hopper, and as the input material increases, when the switch part is tilted about 17 degrees, the inside of the material flow will move and output the contact signal. Inclined switch cast iron structure, wear resistance is strong and strong, widely used to detect bulk material (such as powder, grain body, block body) silo or transfer tank top level.

　　· the action Angle is about 17 degrees.

　　· contact points constitute the normally closed contacts.

　　· contact capacity 24VDC/220 VAC.

　　· protection grade IP67.

　　· shell: cast iron structure, nickel chrome plated surface.

　　Model: st-20, st-20p, 20-39, 20-39-25, hnst-kg, mffp20-30.

　　EBFD - 60 adopt universal contact switch, tilt switch direction without limit, epoxy resin casting, a cylindrical structure, using the location of the user can according to the identified, will this device is hung above bin or yard, the initial position perpendicular to the horizontal plane, when the height of the material to achieve a controlled position, the extrusion of tilt, the indicator when the tilt Angle is greater than 15 to 30 degrees, switch action, from normally open to normally closed or by the normally closed into a normally open contacts, users will switch circuit connected to control indoor, can control the material level height.

　　Tilt switch technical parameters.

　　Standard type ST-20 -39 20-39-25, KBC-220.

　　1. Rated contact: 24V/220VAC/2A.

　　2, the rated temperature: - 20 ~ 100 ℃ (200 ℃) can be customized

　　3. Shell material: stainless steel.

　　4. Cable length: 6000mm (can be customized)

　　5. Probe length: 180mm.

　　6. Total length of probe: 210mm.

　　7. Tail connection thread: M20 x 1.5 * 50.

　　8. Product weight: 1.2kg.

　　ST - 20 p light

　　1. Rated contact: 24V/220VAC/2A.

　　2, the rated temperature: - 20 ~ 100 ℃ (200 ℃) can be customized

　　3. Shell material: engineering plastics.

　　4. Cable length: 6000mm (can be customized)

　　5. Probe length: 195mm.

　　6. Total length of probe: 230mm.

　　7. Tail connection thread: M20 x 1.5 * 50.

　　8. Product weight: 0.7kg.

　　Typical applications

　　The material flow is used to detect the detection material level/liquid level.

　　The cable should be kept slack when mounting with cable.

　　Product features

　　Simple structure, strong and corrosion resistant.

　　High wear resistance upper limit switch.

　　Protection grade IP67.

　　The probe can be used alone, and can be used with the control device.

　　Full metal enclosed mercury switch.

　　Technical specifications

　　Action Angle: about 20 degrees.

　　Contact capacity: 100V AC0.5A 24V DC1A.

　　Output: NC * 1

　　Detection distance: 5M (Max) from the installation position

　　Protection grade: IP67.

　　Ambient temperature: - 20 ℃ ~ + 80 ℃

　　The ebfd-60 tilt switch is used to detect the upper bound and chute blockage of powdery, granular, block-shaped storage in stable state. When the tilt switch probe of the vertical suspension is affected by external forces and is 20 degrees away from the vertical position, the mercury switch inside the switch contacts the action, and the normally closed contact is disconnected. When the external force is removed, the tilt switch returns to the vertical state, and the internal switch contacts and closes. The working condition of the equipment is judged by the change of contact opening in the tilt switch so as to take timely measures to achieve the purpose of safety protection.

　　Ebfd-60 tilt switch is a testing switch for coal bit level in power plant, and the import of imported foreign technology is a simple structure, easy to use, safe and reliable material flow and material level detector. Small size, easy to install, strong and corrosion resistant. Purpose: to block the detector at the chute or transit; Conveyor belt deviation detector; Unloading probe of dumper; Used for belt and vibration feeding machine lack of material or no material detection.

　　The company also produces the following products:

　　Ramsay TILT SWITCH TILT SWITCH 20-39-25, 21-39, 20-41.

　　Ramsey level switch 20-39-25, Ramsey level 20-39-25.

　　Tilt switch, material gauge st-20, st-20p, ETS-9, mercury switch, coal flow switch.

　　Mercury level switch ST-20, 20-39, HNST-KG, MFFP20-30.