是用于检测带式输送机运行过程中输送带跑偏程度并进行报警以及自动触发紧急停机的一种保护装置。

　　< 使用跑偏开关可防止昂贵的输送带受损害以防止进一步的工矿事故和人生伤害。

　　< 两级跑偏开关可防止在安全运行输送系统里是不可缺少的保护装置，其广泛应用于钢铁厂、火力发电厂、水泥厂、化工厂、港口等等。

　　应用范围

　　常规皮带输送机，包括平皮带输送机和槽形皮带输送机

　　地下、索道支撑皮带输送机

　　轮船装卸系统、堆取料输送机

　　技术规格

　　接点容量:2个SPDT 400VAC 10A

　　一级报警:20° 二级报警:35°

　　侧面滚轮倾斜角度:≤75°

　　防护等级:IP67

　　环境温度:-20℃～+80℃

　　电缆入口:M20*1.5

　　电缆规格:6~12mm

　　注意事项

　　1、跑偏开关档轮与皮带保持垂直。

　　2、建议跑偏开关挡轮与皮带边缘距离保持120-160mm。

　　3、跑偏开关底座固定牢固。

是用于检测带式输送机运行过程中输送带跑偏程度并进行报警以及自动触发紧急停机的一种保护装置。使用跑偏开关可防止昂贵的输送带受损害以防止进一步的工矿事故和人生伤害。两级跑偏开关在安全运行输送系统里是不可缺少的保护装置，其广泛应用于钢铁厂、火力发电厂、水泥厂、化工厂、港口等。

　　The ebs-80 two-stage deviation switch is a protective device used to detect the deviation degree of conveyor belt running in belt conveyor and to alarm and automatically trigger emergency shutdown.

　　The use of the switch can prevent the expensive conveyor from being damaged to prevent further accidents and life injuries.

　　The two-stage deviation switch can be used in the safe operation of conveying system. It is widely used in steel plants, thermal power plants, cement plants, chemical plants, ports and so on.

　　Range of application

　　Conventional belt conveyor, including flat belt conveyor and trough belt conveyor.

　　Underground and cable support belt conveyor.

　　Ship loading and unloading system, piling conveyor.

　　Technical specifications

　　Contact capacity: 2 SPDT 400VAC 10A.

　　Secondary alarm level alarm: 20 ° 35 °

　　The scroll wheel Angle: 75 ° or less

　　Protection grade: IP67.

　　Ambient temperature: - 20 ℃ ~ + 80 ℃

　　Cable entrance: M20*1.5.

　　Cable specification: 6~12mm.

　　Matters needing attention

　　1. The deviation switch gear is vertical to the belt.

　　2. It is suggested that the distance between the steering wheel and the belt edge should be kept 120-160mm.

　　3. The base of the deviation switch is fixed firmly.

　　The ebs-80 two-stage deviation switch is a protective device used to detect the deviation degree of conveyor belt running in belt conveyor and to alarm and automatically trigger emergency shutdown. The use of offset switches prevents costly conveyor belts from being damaged to prevent further mining accidents and life injuries. The two-stage running switch is an indispensable protective device in the safe operation and conveying system, which is widely used in steel plants, thermal power plants, cement plants, chemical plants, ports and so on.