UNIMEC伞齿齿轮箱的设计和制造30年，在机械解决方案中根据客户的使用情况和复杂的市场情况，以满足市场的不断增长需求。使的UNIMEC在机械传输领域更加的可靠。

　　UNIMEC伞齿齿轮箱的实际产品形状呈立方体，增加各种机器上安装的可能。

　　UNIMEC伞齿齿轮箱选择的可能性也非常灵活的，直接安装在任何一种电机上，如正常的IEC无刷电机，气动电机等。效率高，噪音低。

　　UNIMECCasings

　　Bevel gearboxes casings have a cubic base form, with six completely machine finished outer faces and

　　varnished inner parts. Each face is supplied with mounting holes, while the finished hubs and flanges show

　　outer tolerance centerings.The casing are made of grey cast iron EN-GJL-250 (according to the UNI EN

　　1561:1998 requirements), except for size 500 whose casing is made of electro-welded carbon steel S235J0

　　(according to the UNI EN 10025-2:2005 requirements).

　　UNIMECGears

　　All the gears are alloy steel 17NiCrMo 6-4 (according to the UNI EN 10084:2000 requirements).

　　They have a Gleason

　　type helicoidal geometry toothing, with variable helix angle depending on the ratio for

　　a better meshing and an optimum torque distribution.

　　The bevel gear set undergo thermal treatments like case-hardening, and carburizing and then they are run-

　　in in couples with marking of the contact point; all this allows a perfect and noiseless meshing. All the gears

　　planes and holes undergo a grinding process.

　　UNIMECShafts

　　The bevel gearboxes protruding shafts are made of carbon steel C45 (according to the UNI EN 10083-

　　2:1998 requirements); the hollow shafts on the contrary are made of steel 16NiCr4 (according to the UNI

　　EN 10084:2000 requirements), and they undergo case-hardening, carburizing and grinding treatments for

　　their inner diameters. All shafts are induction ground and case-hardened in the contact area with the seals.

　　A wide range of geometries is available for the shafts: hollow shafts with key, broached or for shrink-disks,

　　protruding or over-size.