详细说明
注塑机测力传感器主要特点:稳定性强、变形量小，采用优质不锈钢材质。
适用范围:应用于注塑机压力、压装机械力、汽车装配、轴承装配力等其它力学实验设备力值测量。
可配置信号放大器、显示仪表、数字称重控制器,供PLC数据采集.可按要求定制。
型号:A1020
量程:3KN 5KN 10KN 15KN 20KN 30KN
精度:0.5% of rated output
额定输出:1.5mv/v±10%
激励电压:6-15v
受力方向:压向
尺寸图:
技术参数:
| 额定输出 | Rated Output | 1.5mV/V ±10% |
| 精度 | Accuracy | 0.5% of rated output |
| 推荐激励电压 | Rated Excitation | 6V DC/AC |
| 最大激励电压 | Maximum Excitat | 15V DC/AC |
| 零点输出 | Zero Balance | ±2% of rated output |
| 非线性 | Nonlinearity | ±1% of rated output |
| 滞后 | Hysteresis | ±0.8% of rated output |
| 非重复性 | Nonrepeatability | ±0.5% of rated output |
| 蠕变(30分钟) | Greep(30min) | ±0.5% of rated output |
| 安全过载 | SafeOverload | 120% |
| 极限过载 | UltimateOverload | 150% |
| 温度补偿范围 | CompensatedTemp | -10℃ to +40℃ |
| 工作温度范围 | OperatingTemp | -10℃ to +60℃ |
| 零点温度漂移 | Temp.Shift Zero | ≤0.05% of rated output/℃ |
| 灵敏度温度漂移 | Temp.ShiftSpen | ≤0.05% of rated output/℃ |
| 输入阻值 | Input Resistance | 385Ω±10Ω |
| 输出阻值 | Output Resistance | 350Ω±50Ω |
| 绝缘阻值 | Insulation Resistance | ≥5000MΩ(50V DC) |
| 防护等级 | Ingress Protection | IP65 |
| 弹性体材料 | Elastomer material | 不锈钢Stainless steel |
| 电缆线规格 | Cable specification | Φ5*3000mm |
| 电缆线颜色 | Cable color | Red(E+) Black(E-) Green(S+) White(S-) |