一、产品特点:1、适合对容量2800MAH以下的锂离子手机电池充电。
2、 采用标准的USB 2.0充电 接口
3、IC控制充电过程,充电速度快,效率高, 充满时自动恒温恒压,自动饱和检测, 避免电池过充,充电饱和度可达95%以上。
4、外观高档,时尚携带配备方便,旅行首选。
5、都经过严格的测试老化程序! 质量第一,价格最优。
6、 产品在安全性、稳定性以及兼容性方面都已经达到国际标准安全可靠。
二.产品参数
1.输入:110V-240V
2.输出:5V1000mA
3.指示灯:无指示灯
4.线:USB 直线(客户自配)
5.接头:可以根据客人需要订制
6.颜色:黑色白色
7.材质:PC
8.电压4.5V,纹波及噪音(mVp-p)<1%输出电压,温度系数±0.02%/℃,启动时间≤Is(240输入,Io=100%)保持时间≥200ms(240输入,Io=100%)输出电流可设为恒流输出模式,非常精确
9.保护功能:过载保护105%~180%的额定功率,冷却方式:自然冷
10.锂电直充,人机界面清晰,充电LED亮红灯,适用于手机,矿灯.手电筒,数码产品的锂电池充电
三.包装资料
1.包装材料:透明胶袋包装、白盒包装、彩盒包装、吸塑包装
2.产品尺寸: 70mm* 68mm* 32mm
3.包装尺寸:41.5cm*31.5cm*41.5cm
4.装箱:200pcs/箱 11KG/箱
5.单重:55g
6.可以通过客人需要订制指定包装及印刷客人LOGO
四、使用说明:
1、输出电流:最大2100mA左右
2、负载输出电压:4.16 ~ 5.0V
3、充电器工作时间:不小于4小时
4、电池充电饱和度:按上述时间充电时,电池充电饱和度应≥95%
5、可以适用于任何手机充电(只需要接入相应手机数据线即可)。
6、工作状态:电源指示蓝色灯亮:表示充电器已接通电源
五 、注意事项:
1.请勿强烈撞击本产品.
2.请勿在潮湿,易淋水处使用.
3.请勿对本产品进行改造,分解.
2、避免在温度高,太阳晒到的地方充电,温度过高会影响充电效果,造成充电指示灯不灭。
4、充电时,充电器外壳,电池外壳有些微热属于正常现象
输入电压范围AC100-240V.宽电压输入,符合全球使用标准。
<.输入电压频率:50-60Hz.
<.输出电压:5V
<.输出电流范围:0.1-1A MAX
<.输出电压调率:+-5%
<.输出纹波&噪音100mVp-p.直流纹波小,工作效率高,温度低,使用寿命长,
<.工作效率80-85%.低功耗设计空载功耗小于0.3W
<.输出短路保护.内置过流.过压保护
<.过热保护.
<.湿度10%-95%RH
<.产品100%满负载老化。
<.高性能价格比、稳定可靠1年质量保修期
本产品适用手机,平板电脑,数码相框,加湿器,空气净化器,电子冰箱,LED灯具,安防,按摩器等
产品规格:
输入电压:AC:100V-240V
输出电压:DC:5V -1A
插头规格:美规(可选规格:美规、欧规)
input:100V-240V AC,50HZ/60HZ;
output:5V1000MA±3%;
产品尺寸:84.8mm*36.4mm*22.3mm
产品单重:≈35g
包装方式:开窗彩盒吸塑包装
产品插脚:欧规插脚;
产品颜色:多种颜色,可以OEM。白+灰白;
工作效率:≥70%,五级能效要求;
工作方式:带线30pin输出,线长 1m.
单口充电:最大1000MA,智能匹配充电设备,5V0.5A,5V1A;
双口充电:无;
产品特性:稳压、恒流,过流、过压保护,短路保护;
适用机型:ip4/4GS/3GS
Input voltage range AC100-240 v. wide voltage input, conform to the global use of standard.
Low input voltage frequency: 50 to 60 hz.
Low output voltage: 5 v
Low. The output current range: 0.1-1 a MAX
Low. The output voltage adjustable rate: + - 5%
Low. The output ripple & noise 100 MVP - p. dc ripple is small, high efficiency, low temperature, long service life,
Low. The efficiency of 80-85%, low power design no-load power consumption is less than 0.3 W
Low. The output short circuit protection. The built-in over-current. Overvoltage protection
Low overheating protection.
Low humidity 10% 95% RH
Low. Products 100% full load aging.
Low. The high performance price, stable and reliable quality guarantee period 1 year
This product is applicable to mobile phones, tablet PC, digital photo frame, humidifier, air purifier, electronic refrigerator, LED lamps and lanterns, security, massager, etc
Product specifications:
The input voltage, AC, 100 v to 240 v
Output voltage: DC: 5 v 1 a
Plug specification: ul (optional specifications: ul and European rules)
Input: 100 v to 240 v AC, 50 hz / 60 hz;
Output: 5 v1000ma + / - 3%;
Product size: 84.8 mm * 36.4 mm * 22.3 mm
Single product: 35 g material
Packing: window color box blister packaging
Products pin: the gage pins;
Product color: many colors, can be OEM.White + grey;
Efficiency: 70% or higher, five energy efficiency requirements;
Works: take 30 pin output line, line 1 m long.
Stand-up charging: biggest 1000 ma, intelligent matching charging equipment, 5 where v0. 5 a, 5 v1a;
Double charge: no;
Product features: voltage stability and constant current, over-current, over-voltage protection, short circuit protection.
Applicable models: ip4/4 gs / 3 gs