黄冈红安罗田县美孚齿轮油-涡轮机油经销处

　　320齿轮油通常在工作温度时的密度大约为0.88克/立方厘米。

　　这个数值是基于一般情况下的工作温度，通常是50℃。在这个温度下，320齿轮油的黏度在150-220毫帕秒（mm²/s）之间。需要注意的是，温度的变化会影响齿轮油的黏度，温度升高会导致黏度降低，反之则黏度增加。因此，在选择320齿轮油时，除了考虑密度外，还需要根据机器的工作环境、要求和所需的黏度来确定最适合的油品The density of 320 gear oil is typically around 0.88 grams per cubic centimeter at operating temperatures. This value is based the general operating temperature, which is usually 50℃. At this temperature, the viscosity of 320 gear oil is between 150 and 220ipascal-seconds (mm²/s). It is important to note that changes in temperature can affect the viscosity of gear oil, with an increase in temperature leading to decrease in viscosity and vice versa. Therefore, when selecting 320 gear oil, in addition to considering the density, it is also necessary to determine the most suitable oil on the working environment, requirements, and the desired viscosity of the machine。