海门市悦来镇经销处壳牌468液压油-压缩机油

　　抗磨液压油油温过高或过低的影响，我们应该采取一此什么措施对砖机设备油温进行控制呢？

　　① 当油温过低的时候，我们要进行暖机运转，起动发动机，空载怠速转3-5min后，液压砖机以中速油门提高发动机转速，操纵手柄使工作装置的任何一个动作至极致，保持3-5min使液压油通过溢流升温。

　　② 如果油温过高则需要适当增加暖机运转时间，砖机设备在温度超过标准时，注意散热器散热片不要被油污染，以防尘土附着影响散热效果，空心砖机保持足够的油量以利于油的循环散热，炎热的夏季不要全天作业，要避开中午高温时间生产。Anti-wear hydraulic oil temperature is too high or too low, we should take this measure of oil temperature control brick machine equipment? 1 when the oil temperature is too low, we want to warm up the engine operation, start the engine, idle for 3-5 minutes, hydraulic brick machine with a medium-speed throttle to increase engine speed, the operating handle maximizes any action of the working device by holding the hydraulic oil for 3-5 min to raise the temperature through the overflow. If the oil temperature is too high, it is necessary to increase the warm-up running time appropriately. When the temperature of the brick machine exceeds the standard, pay attention to the radiator fin not to be polluted by the oil, so as to prevent the dust adhesion from affecting the heat dissipation effect, hollow brick machine to keep enough oil to facilitate the circulation of oil heat, hot summer do not work all day, to avoid high temperature at noon time production.