邳州市运河街道壳牌468液压油-齿轮油供应链

　　运动粘度40℃（189，242）mm2/s。

　　齿轮油以石油润滑油基础油或合成润滑油为主，加入极压抗磨剂和油性剂调制而成的一种重要的润滑油。用于各种齿轮传动装置，以防止齿面磨损、擦伤、烧结等，延长其使用寿命，提高传递功率效率。齿轮油应具有良好的抗磨、耐负荷性能和合适的粘度。此外，还应具有良好的热氧化安定性、抗泡性、水分离性能和防锈性能。由于齿轮负荷一般都在490兆帕（MPa)以上，而双曲线齿面负荷更高达2942MPa，为防止油膜破裂造成齿面磨损和擦伤，在齿轮油中常加入极压抗磨剂，普遍采用硫-磷或硫-磷-氮型添加剂。齿轮油的工作温度一般较内燃机油低，在很大程度上随环境温度变化而变化，车辆齿轮油油温一般不高于100'C。The kinematic viscosity was 40 ° C (189,242) mm2/s. Gear oil is an important lubricating oil made from petroleum-based base oil or Synthetic oil oil mixed with extreme pressure anti-wear agent and oiliness agent. Used in all kinds of gear transmission devices to prevent tooth surface wear, abrasion, sintering, etc. , extend its service life, improve the efficiency of power transmission. Gear oil should have good wear resistance, load resistance and appropriate viscosity. In addition, it should also have good thermal oxidation stability, anti-foaming, water separation performance and anti-rust performance. Because the gear load is usually over 490 MPa, and the hyperbolic gear load is even higher than 2942 MPA, in order to prevent the oil film from breaking and causing wear and abrasion on the gear surface, extreme pressure antiwear agent is often added to the gear oil, s-P or s-p-n type additives are widely used. The working temperature of gear oil is generally lower than that of internal combustion engine oil, which varies with the ambient temperature to a great extent. The temperature of vehicle gear oil is generally not higher than 100' C.