轻质屋面板和砖墙一样，可进行多种层装饰，轻质屋面板在测算工程量时，一般分为两大类计算。一种是轻质屋面板测算方式是罗马柱帽、栏杆柱帽、圆弧、图案拼接、包柱、包角等异形构件，由于造型多样，技术要求高，安装难度大，它的工程量一般情况下，是按照产品的装饰外表面展开面积，乘以系数进行计算。

　　Like the brick wall, the light roof panel can be decorated in various layers. When measuring the quantity of the project, the light roof panel is generally divided into two major categories. A lightweight roof panel measure is Rome column cap, baluster cap, arc, pattern stitching, package, bag and other special-shaped column angle member, because of various shape, high technical requirements, difficult installation, its quantity in general, is in accordance with the decorative outer surface of the products launched area, were calculated by multiplying coefficient.

　　另一种是窗台线、门窗套、檐线、腰线、等线条展开宽度，在200mm以内者，按实际安装数量，以延长米计算，如展开宽度超过200mm以上时，按图示尺寸粘接面以外展开面积计算。

　　The other is window width, window and door cover, eaves line, waist line and other line widths. Within 200mm, according to the actual installation quantity, to extend the meter calculation, if the expansion width is over 200mm, the area calculated outside the size of the adhesive surface shall be calculated.

　　需要注意的是，安装轻质屋面板构件时，如果构件预埋件，在遇空心砖的位置，采用加长螺栓穿墙的方式，或者在上下层主体结构部位，加通长角钢固定安装节点。

　　Note that the installation of light roof panel member, if the member in the case of embedded parts, hollow brick wall bolt position, with longer way, or in the upper and lower parts of the main structure, with horns fixed steel node.

　　山东非凡新型建材有限公司

　　诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家！