详细说明
微型拨动开关,拨动开关,SS拨动开关,3.5耳机插座,2.5耳机插座,USB插座,DC电源插座,多功能五向开关专业生产各类DC插座,DC电源插座,USB插座等,外形美观,寿命长,用于家用电器,玩具,汽车音响,电脑及IT周边产品.DC插座DC直插式电源插座系列 DC贴片式插座
| RATING（额定值）: DC 50V 0.3A |
| PRACTICALTEMPERATURERANGE使用温度范围 | -16~65ºC在-16ºC~+65ºC温度内使用 |
| STANDARD ATMOSPHEICCONDITIONS测试标准状度 | UNLESS OTHERWISE SPECIFIEDTHE STANDARD RANGE OF ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTSAND TESTS ARE AS FOLLOWS:(1) BETWEEN BODY AND CONDUCTOR: 5ºC TO 35℃(2) BETWEEN CONDUCTORS NOT TO BE CONTACT:45% TO 85%(3) PRESSURE:86Kpa TO 106Kpa在没有指定的情况下测试温度、湿度、气压如下:(1) 温度为5℃~35℃(2) 湿度为45%~85%(3) 气压为86 Kpa~106Kpa |
| MECHANICAL（机械性能） |
| ITEM 项目 | TEST CONDITIONS测试条件 | PERFORMANCE 规格 |
| 1 | CONNECTIONFORCE插入力度 | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES。依据标准的PLUG GAUGE 做第3次拔插后测定 | 3~20N |
| DISCONNECTIONFORCE拔出力度 | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES。依据标准的PLUG GAUGE 做第3次拔插后测定 | 3~20N |
| 2 | TERMINALSTRENGTH端子强度 | A STATIC LOAD OF 0.1N/m(1kgf/cm)SHALL BE APPLIED TO THE TIP OF THE TERMINAL FOR 1 MININ ANY DIRECTION向排脚先端的任意一个方向加1分钟0.1N/m(1kgf/cm)的力度. | THERE SHALL BE NO DAMAGETO THE TERMINAL SUCH AS CRACKS, LOOSENESS OR PLAY ELECTRICAL ,AND MECHANICALCHARACTERISTICS SHALL BE SATISFIED在排脚中没有裂开、松动等异常，满足于机械、电气性能 |
| ELECTRICAL（电气性能） |
| ITEM项目 | TEST CONDITIONS 测试条件 | PERFORMANCE 规格 |
| 3.1 | CONTACTRESISTANCE接触电阻 | MEASURED AT SMALL CURRENT （100m A OR LESS）1000Hz在微小电流（100 m A）以下测试 | ≤0.03Ω |
| 3.2 | INSULATION RESISTANCE绝缘电阻 | APPLY A VOLTAGE OF 500V DC FOR 1 MINTO FOLLOWING PORTIONS AFTER WHICH MEASUREMENTSHALL BE MADE:BETWEEN BODY AND CONDUCTORBETWEEN CONDUCTORS NOT TO BE CONTACTBETWEEN CONDUCTORS NOT TO BE WHEN PLUG IS INSERTED DC 500V 1 MIN输入500V DC 电压1分钟，按以下接触方法测试:插座体与排脚之间不接触的排脚之间插头插入时不接触排脚之间 | ≥100MΩ |
| | | | | |