l  If found any faulty part or damage of machine after unpacked, please inform our company or relevant office within 7 days, and photo the damaged parts to send to our company, our company will send assigned staff to deal with it soon.

　　l  Please take care to read all the instructions included in this manual, as well as the information included on the plate attached to the machine. Our company will not be responsible for any damage caused by use not included in the instructions in this manual, or caused by negligence or incorrect use.

　　l  Our Company will not be held responsible for any unauthorized modifications or changes made to the machine by the purchaser, who then becomes responsible for the machine.

　　l  Please ask professional staff to maintain or repair machine in order to know the position or causes of faults earlier when our staff go to test running the machine, which also shorten the repair time.

　　l  The following situation appears in your company have nothing to do with our company, our company won’t bear any responsibility.

　　a)  Materials used for test-running of the new machine.

　　b)  Profit lost in the process of the manufacture or marketing of finished products.

　　c)  Person injury caused from wrong operation as failure of complying with operation manual.

　　d)  Invasion events resulted from products manufactured by this machine that involved patent, registered trademark and intellectual property rights.

　　Ø Machine Warranty.

　　l  Spare parts described in this manual（except consuming parts）all have one year Warranty (from purchase date), if any damage (except wrong operation) during warranty time, our company will repair or replace them for free.

　　l  In order to guarantee the rights and benefits of buyers for purchasing this machine, buyers should hold the purchase contract or rent contract to consult our company for this machine and enjoy the maintenance service after sales.

　　l  This guarantee is only valid for buyers.制鞋机械

　　Ø Specification and Features.

　　l Specification:

　　l Features:

　　a)       Functional forming band and wiper with special path make vamp attach to shoe last closely after toe lasting, which improves shoes quality and appearance.

　　b)       Head-pressing mechanism adopts adjustable two-part pressure, primary and secondary tank design make shoes get the last pressing over wiper’s lasting and reach the best effect.

　　c)        Nine-pincer can be adjusted separately in order to act in concert with lasting of toes in different shape.

　　d)       Each group of pincers have independent and automatic drop-down ability, operators can choose pincers needed to do the pulling action according to tightness of vamp.

　　e)       Wiper has the function of micro-action and speed adjusting which make adjustment easily over the lasting process.

　　Ø Installation.

　　l  Installation sequence:

　　a)      Place machine and make it stable.

　　b)      Clean anticorrosive oil.

　　c)      Open the cover of oil tank, fill in hydraulic oil (Code: R-68# of Chinese Petroleum Company) about 60 liters. Keep hydraulic oil clean.

　　d)      When connect the power supply, please check the voltage used in factory whether the same with where the nameplate shows.

　　e)      Turn the power switch to the position of “ON”, press down the switch of motor, and check pressure gauge, if pressure not rise, maybe it rotated reversely, only change any two phases of three.

　　Ø Maintenance.

　　a)      Slide section of the heel mechanism should be lubricated once a week for adjusting.

　　b)      Oil pipe, connector should be locked in case of oil leakage; steel pipe cannot rub on the other one; before taking apart oil pipe, please check whether the pressure gauge shows “0”, only no pressure can take apart the oil pipe.

　　c)      Hydraulic oil in oil tank should be replaced after 2500 hours using, for new machine, it’s better 2000 hours. Filter screen of new machine should be cleaned after 500 hours using since machine installed or oil replacement, or a loud noise from pump larger. Oil tank should be cleaned after each replacement; oil level should be at least 30mm higher than filter screen and about 30mm lower than tank cap, but tank can’t be full.

　　d)      Keep spare parts of appliance clean.

　　e)      Clean machine after work everyday, the longer the time, the more difficult to clean; check the screw whether loose or not, lock it if need.

　　f)       Stop motor when machine not working (but warming-up in the morning).

　　g)      Each slide position and where installed grease nozzle should be lubricated once a week.

　　h)      Check pressure of nitrogen in the pressure reservoir weekly, to replenish nitrogen if found it lower than 100kg/cm2 (use nitrogen instead of other gas in case of danger.)

　　In order to get the best using effect and lengthen machine service life, please choose the high quality hydraulic oil as different brands in different countries, our company introduced the following brands for our customers.

　　Remark: if your company can’t get the above oil, please choose solvent with erosion resistance between 200-250SUS, or hydraulic oil with viscosity between 40-60CST.

　　Ø Operation Attentions.

　　l  Before changing shoes, please pay attention to relevant parts which should be act in concert with shape of shoe last, or can’t get a good lasting effect.

　　a)      Wiper shape should be similar with toe’s, and the arc of wiper face should coincide with that of bottom face of shoe last.

　　b)      Shape of forming band should be act in concert with that of last.

　　c)      Size of mid-pincer should coincide with the toe section, besides, shape of the front three pincers ranking should coincide with the toe section, or influence the lasting effect.

　　d)      External support should make a good choice according to the size of shoe last.

　　e)      When produce child shoes, it’s better choose the front 7 pincers, and abrade the PU head-pressing to small as their small sizes.

　　f)       PU head-pressing has two kinds of specification, which can be chosen according to woman or man shoes prepared to produce.

　　l  Take right operation way to operate machine, especially when pincers clamping vamp, hands should be far away from pincer in case of danger.

　　l  Over lasting, please don’t touch any parts or section in case of danger, if found somewhere in a disorder, step on the foot switch on the right to brake, then adjust again.

　　l  Over maintenance, no matter operators or others can’t make machine run.

　　l  Operators and maintenance men should pay more attention to the heating area of wiper in case of injury.

　　Ø Function.

　　This machine is QF-737A (MA) Hydraulic Automatic Toe Lasting Machine, a molding machinery with 9-pincer clamping vamp to mold toes. This machine can meet the demands of attaching to shoe last, with easy operation, high efficiency, stable quality and easy maintenance. It applies to some special types like hiking boots, working shoes and some general ones such as child shoes, sports shoes, woman shoes, horse boots, gentleman shoes etc..