压力最强的压底机--强力墙式压底机。这款压底机是由东莞市奇峰液压科技有限公司（奇峰鞋机）2012年研发而成。它的性能:1.本机采用全油压系统设计，适用于龙船底、墙式包底运动鞋及休闲鞋的外底压着。压底、压边及压前后可一次完成或个别完成，出力大、贴合牢固，除节省人工外，压着均匀、效果佳，是制鞋业升级的自动化压底设备；2.上升油压缸使用预充阀补充油量，可使操作上升动作加速，节省操作时间，增高经济效益；3.压杆机构采用油压自动平衡系统，压杆高低不需调整，操作简单；4.压杆机构自动偏摆角度定位设计，使鞋子取放容易，长统或半长统鞋操作上，亦非常方便；5.前后束紧机构后退时，采用特殊电路设计控制其后退距离，更换鞋子大小容易；6.每个动作均具有外部手柄调压功能，使鞋子底部压着更完美；7.自动平衡压杆及偏摆机构:两支压杆高低调整采用油压自动平衡结构，对于鞋楦之高低变化均免调整，并确保两支压杆之压力平均，使鞋底之压著力量更均匀。两支压杆可同时做偏摆动作，以利鞋楦之取放，一改旧式机台压杆为固定式，解决操作不便之问题；8.压边机构:鞋楦两侧之压著采用全油压动作，两边各有九个橡胶发泡体压块，可随其大小不同之鞋型做密实之墙边压著，而每个压块均由独立之油压缸推动，每支压力可达250-300KG，前后各有两组并装置挡梢供选择用与不用，使鞋边之黏著达到最佳效果；9.有18块底部片状压片，每片压片均有油压缸控制，随着鞋型变化上升并压著定型；10.底部片状橡胶可根据鞋底的变化，更换垫块高度或修改，不须使用模具，节省大量成本。

　　QF-818A/B/C 强力墙式压底机英文介绍:1. This machine is fully controlled by hydraulic system. It is suitable for outsole attaching of jogging shoes, walled sports shoes and casual shoes. The operation of outsole preessing, and front-rear pressing can be accomplished simultaneously or respectively. The heavy pressing helps the shoe industry with higher production.2. There is a prepared oil-tank to supplement oil when cylinder rising which makes the rising faster and saves the operation time to increase benefit.3. The hydraulic automatic balancing system is adopted for the machanism of pressing rods. The height of rods need no manual adjustment which simplifies the operaton.4. The design of automatic bias angles setting for the machanism of pressing rods makes shoes locate easily and even for boots.5. When the mechanism of front-rear forming bands retreat, a special circiut device is adopted to control the receding stroke, and the proper receding distance is controlled according to the shoes locating in different size.6. There is a peressure adjusting function for every operation which makes the pressing result pefect.7. Automatic balancing rods and swing attaching mechanism:The height of attaching rods is controlled by hydraulic automatic balance system so it isn't necessary to adjust the attaching rods when the height of last is different, it also could ensure the pressure of the two attaching rods almost the same as well as the attaching power on every point of the sole. The attaching rods can swing simultaneously. It is convenient to put or take out of the last. The design is better than the old one with fixed attached rods.8. Side attaching mechanismThe side attaching adopts the whole hydraulic controlling system. There are nine pieces of rubber foaming pressing objects to make a tight pressing according to the shape of shoes. Each forming pressing object is controlled by individual cylinder of which pressure reaches 250-300kg/s.Two sets of these forming pressing objects individually are in the front and back for options to ensure the best performance of side attaching.9. Special function for QF-818Ba. There are eighteen pressing pads on the bottom of the pressing machanism.The pads are controlled by cylinders to rise and down to firm the shoes in different shape.b.The pressing pads can be changed with different height ones or be modified to meet different shapes of outsoles without using models so as to save cost.