EPOLAM 5015 RESIN
积层环氧树脂Tg: 80°C-
可操作时间 45 分钟到 4 小时
应用
此环氧树脂主要用于采用真空导入，真空和低压注射以及缠绕法等工艺制作复合材料结构产品
特性
低粘度
机械性能好
对纤维的浸渍性好
对木材和泡沫有良好的浸渍性
在潮湿环境中保持良好的性能
操作过程
注意:
5015树脂必须在50℃以上加热2小时的条件下脱模
为了获得所要求的耐热性和最好的机械性能，需根据固化剂种类在24到48小时内进行相应的后热固化处理。
为了避免变形，建议将积层放在托架上。
为了EPOLAM5015/5016体系有良好的聚合反应，建议在室温20℃以上的环境中工作。
如需进一步的技术产品资料，请与SIKA技术服务部门联系。
安全防范
通常在手工操作时需注意健康和安全防范
--确认工作环境通风良好
--操作人员需戴手套和安全眼镜进一步的资料
请参考产品的物料安全数据表
储存
放置在原始的包装容器中于干燥的环境下，温度在15-25℃，有效期为24个月。
包装上注明有效期。
包装树脂
EPOLAM 5015固化剂1 ×20 kg
EPOLAM5014固化剂1 × 6.8 kg
EPOLAM5015固化剂1 × 6.0 kg
EPOLAM5016固化剂 1× 18 kg
更多资料请联系我们。
EPOLAM 5015 RESIN
Laminated epoxy Tg: 80°C-
Operating time: 45 minutes to 4 hours
application
This epoxy resin is mainly used for composite structure products by vacuum injection, vacuum and low pressure injection and winding process
features
low viscosity
Good mechanical performance
Good impregnation of fibers
Excellent impregnation of wood and foam
Maintain good performance in wet environments
The operation process
Note:
5015 resin must be demoulded under the condition of heating above 50℃ for 2 hours
In order to obtain the required heat resistance and best mechanical properties, the appropriate post-thermal curing treatment is performed within 24 to 48 hours, depending on the type of hardener.
To avoid deformation, it is recommended to place bedding on brackets.
In order to have good polymerization reaction of EPOLAM5015/5016 system, it is recommended to work at room temperature above 20℃.
For further technical product information, please contact SIKA Technical Services.
safety
Health and safety precautions must be taken during manual operations
-- Make sure the working environment is well ventilated
-- Operators need to wear gloves and safety glasses for further information
Please refer to the material safety data sheet of the product
storage
Store in original packing container in dry environment at 15-25℃ for 24 months.
The expiry date is marked on the package.
Packaging resin
EPOLAM 5015 curing agent 1 ×20 kg
EPOLAM 5014 curing agent 1 × 6.8 kg
EPOLAM 5015 curing agent 1 × 6.0 kg
EPOLAM 5016 curing agent 1 × 18 kg
Please contact us for more information.