PRODUCT DESCRIPTION

　　LOCTITE® 417 provides the following product characteristics:

　　Technology Cyanoacrylate

　　Chemical Type Plasticized ethyl cyanoacrylate

　　Appearance (uncured) Transparent, colorless to

　　slightly yellow liquidLMS

　　Components One part - requires no mixing

　　Viscosity Very low

　　Cure Humidity

　　Application Temporary bonding

　　Key Substrates Metals and Glass

　　LOCTITE® 417 is designed for temporary bonding applications.

　　It is a low strength product used in applications where

　　minimum adhesion is required. Bonded parts can be debonded

　　ultrasonically by immersion in detergent solution; by heat or, in

　　some cases, by impact.

　　TYPICAL PROPERTIES OF UNCURED MATERIAL

　　Specific Gravity @ 25 °C 1.05

　　Viscosity, Cone & Plate, mPa·s (cP):

　　Temperature: 25 °C, Shear Rate: 3,000 s-1 3 to 8LMS

　　Flash Point - See MSDS

　　TYPICAL CURING PERFORMANCE

　　Under normal conditions, the atmospheric moisture initiates the

　　curing process. Although full functional strength is developed

　　in a relatively short time, curing continues for at least 24 hours.

　　The rate of cure will depend on the substrate used, on the

　　ambient relative humidity and on the bond line gap. Higher

　　relative humidity levels result in more rapid speed of cure. Thin

　　bond lines result in high cure speeds; increasing the bond gap

　　will decrease the rate of cure.