loctite435乐泰435中山珠海江门东莞435深圳江苏

　　PRODUCT DESCRIPTION

　　loctite435乐泰435中山珠海江门东莞435深圳江苏LOCTITE® 435™ provides the following product

　　characteristics:

　　Technology Cyanoacrylate

　　Chemical Type Ethyl cyanoacrylate

　　Appearance (uncured) Colorless to straw colored, slightly

　　cloudy liquidLMS

　　Components One part - requires no mixing

　　Viscosity Low

　　Cure Humidity

　　Application Bonding

　　Key Substrates Metals, Plastics and Rubbers

　　LOCTITE® 435™ is a rubber toughened adhesive with

　　increased flexibility and peel strength along with enhanced

　　resistance to shock. The product provides rapid bonding on a

　　wide range of materials, including metals, plastics and

　　elastomers, as well as porous and absorbent materials like

　　wood, paper, leather and fabric.

　　ISO-10993

　　An ISO 10993 Test Protocol is an integral part of the Quality

　　Program for LOCTITE® 435™. LOCTITE® 435™ has

　　been qualified to Henkel's ISO 10993 Protocol as a means to

　　assist in the selection of products for use in the medical device

　　industry. Certificates of Compliance are available on Henkel's

　　website or through the Henkel Quality Department. Note: This

　　is a regional approval. Please contact your local Technical

　　Service Center for more information and clarification.

　　TYPICAL PROPERTIES OF UNCURED MATERIAL

　　Specific Gravity @ 25 °C 1.1

　　Flash Point - See MSDS

　　Viscosity, Cone & Plate, mPa·s (cP):

　　Temperature: 25 °C, Shear Rate: 1,000 s-1 100 to 250LMS