| Model | PX9 | PX7 | PX2 | PX3 | | Appearance DIN(mm) (W)】(H)】(D) | 96】96】100 | 72】72】100 | 48】96】100 | 96】48】100 | | Function | ·Fuzzy function ·Auto-tuning PID ·External contact input ·Reverse/Direct selectable ·Heater break alarm(HBA1, HBA2) ·Zone PID ·Alarm output ·Ramp ＆ Soak ·Interface(RS 485/422) ·Protection(Front facia IP65) ·Group PID·Multi input-output ·Output limit function ·Set point value 3 steps | | Input | Thermo couple: K, J, E, T, R, S, B, L, N, U.WRe 5-26, PL-弗 R.T.D : Pt 100目, KPt 100目 Direct voltage: 1…5V, 1…10V, -10…20mV, 0…100mV(Programmable scale type) | | Sampling time | 250mS, (When remote option: 500mS) | | Cold junction temperature compensation tolerance | 【1.5∩(15…35∩), 【2.0∩(0…50∩) | | Input impedance | T/C and mV input :1 M目 min, DC V: 1M目 | | Lead wire tolerable resistance | R.T.D: 150目max. / wire | | Input tolerable voltage | 【10V(T/C, R.T.D, voltage: mV DC) 【20V (Voltage: V DC) | | Noise removal rate | NMRR(Normal mode): 40dB min. CMRR(Common mode): 120dB min, (50/60Hz 【1%) | | Standard | T/C, R.T.D: KS, IEC, DIN | | Scaling | According to setting max. voltage(SH), min. value(SL) of measurement range, scaling is available(-1999…9999) | | Standard junction temp. compensation tolerance | 【1.5∩(15…35∩), 【2.0∩(0…50∩) | | Burn-out | T/C : OFF, Up/Down selectable R.T.D: OFF, Up/Down selectable(Detection current: 50nA) | | Accuracy | 【0.1%(Full scale) | | Model | NX9 | NX7 | NX2 | NX1 | NX3 | NX4 | | Appearance DIN(mm) (W)】(H)】(D) | 96】96】100 | 72】72】100 | 48】96】100 | 48】24】100 | 96】48】100 | 48】48】100 | | Function | ·Fuzzy function ·Auto-tuning PID ·External contact input ·Interface(RS 485/422) ·Protection(Front facia IP65) ·Zone PID ·Alarm output ·Output limit function ·Set point value 3 steps ·Group PID ·Multi output ·Reverse/Direct selectable Heater break alarm(HBA1) | | Input | Thermo couple: K, J, E, T, R, S, B, L, N, U.WRe 5-26, PL-弗 R.T.D : Pt 100目, KPt 100目 Direct voltage: 1…5V, 1…10V, -10…20mV, 0…100mV(Programmable scale type) | | Sampling time | 250mS | | Cold junction temperature compensation tolerance | 【1.5∩(15…35∩), 【2.0∩(0…50∩) | | Input impedance | T/C and mV input :1 M目 min, DC V: 1M目 | | Lead wire tolerable resistance | R.T.D: 150目max. / wire | | Input tolerable voltage | 【10V(T/C, R.T.D, voltage: mV DC) 【20V (Voltage: V DC) | | Noise removal rate | NMRR(normal mode): 40dB min. CMRR(common mode): 120dB min, (50/60Hz 【1%) | | Standard | T/C, R.T.D: KS, IEC, DIN | | Standard junction temp. compensation tolerance | 【1.5∩(15…35∩), 【2.0∩(0…50∩) | | Burn-out | T/C : OFF, Up/Down selectable R.T.D: OFF, Up/Down selectable(Detection current: 50nA) | | Accuracy | 【0.5%(Full scale) |
|