简要说明: 宽带600 MHz, 4 模拟通道, 采样率5GS/s, 存储每通道16Mpts 10.4" TFT-LCD触摸屏 技术参数: | Vertical System | | Bandwidth | 600 MHz | | Rise time | 500 ps | | Input Channels | 4 | | Bandwidth Limiters | 20 MHz, 200 MHz | | Input Impedance | 1 MΩ ± 1.0% || 16 pF ± 2 pF, 50 Ω ± 1.0% | | Input Coupling | AC, DC, GND | | Maximum Input Voltage | 1 MΩ: ± 250 Vpk, 50 Ω: 5 VRMS | | Channel-Channel Isolation | ≥ 52 dB at 100 MHz ≥ 30 dB at 600 MHz | | Vertical Resolution | 8 bits | | Sensitivity | 1 MΩ: 2 mV/div - 10 V/div 50 Ω: 2 mV/div - 1 V/div | | DC Gain Accuracy | ±1.5% | | Offset Range | ±1 V: 2 mV/div - 99 mV/div ±10 V: 100 mV/div - 1.0 V/div ±100 V: 1.02 V/div - 10 V/div | | | Horizontal System | | Time/Division Range | 200 ps/div - 1000 s/div | | Clock Accuracy | 5 ppm | | Trigger and Interpolator Jitter | 3 ps (rms) | | | Acquisition System | | Single-Shot Sample Rate/Ch | 10 GS/s on 2 Ch 5 GS/s on 4 Ch | | Equivalent Sample Rate | 50 GS/s | | Memory | 25 Mpts/Ch on 2 Ch 12.5 Mpts/Ch on 4 Ch | | | Acquisition Processing | | Averaging | Up to 1,000,000 | | Peak Detect | na | | Enhanced Resolution (ERES) | Up to 11 bits | | Interpolation | Linear, Sin x/x | | Sequence Mode | Up to 10,000 segments | | | Triggering System | | Modes | Normal, Auto, Single, Stop | | Sources | Ch 1 - Ch 4, EXT, EXT/10, AC Line | | Coupling Mode | AC, DC, LF Rej, HF Rej, | | Pre-trigger Delay | 0 - 100% Full Scale | | Post-trigger Delay | 0 - 10,000 Divisions | | Trigger Sensitivity | 1.0 division: 200 MHz 2.0 division: 600 MHz | | External Trigger Sensitivity | Ext: 50 mV from DC to 10 MHz 200 mV from 10 MHz to 600 MHz Ext/10: 0.5 V from DC to 10 MHz 2.0 mV from 10 MHz to 600 MHz | | External Trigger Input Range | Ext: ±0.4 V, EXT/10: ±4.0 V | | | Display | | Type | Color Touch Screen 10.4" TFT-LCD | | Resolution | SVGA: 800 x 600 | | Grid Styles | YT, XY | | | Trigger Types | | Standard Triggers | Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified | | Optional Advanced Triggers | na | | Optional Serial Data Triggers | I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, MIPI D-PHY, DigRF3G | | | Internal Storage | | Waveform Storage | 4 memory waveforms plus internal HDD | | Setup Storage | 6 setups | | | Math | | Standard Math Functions | Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root | | Optional Math Functions | na | | | Measurements | | Measurement Parameters | Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width- | | | Probes | | Probes | Qty. (4) ÷10 Passive Probes | | Scale Factors | Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷2000, ÷10000 Variable: (÷1x10-6- ÷10000) | | Calibration Output | 1 kHz square wave, 1.0 Vp-p, output to probe hook | | | Interface | | GPIB Port (optional) | 1 (optional) | | USB (Device) | 0 | | Ethernet Port | 1 | | USB (Host) | 5 | | Serial Port | 1 | | | Power Requirements | | Voltage | 90 - 264 VAC, 47 HZ - 63 Hz 90 - 132 VAC, 380 HZ - 420 Hz | | Max. Power Consumption | 340 VA | | | Environmental and Safety | | Temperature (Operating) | 5 °C to 40 °C | | Temperature (Non-Operating) | -20 °C to 60 °C | | Humidity (Operating) | 80% RH, 31 °C 50% RH, 40 °C | | Humidity (Non-Operating) | 95% RH | | Altitude (Operating) | 2000 m | | Altitude (Non-Operating) | 12,192 m | | | Physical Dimensions | | Dimensions (HWD) | 260 mm x 340 mm x 152 mm (10.25" x 13.4" x 6") | | Weight | 7.26 kg. (16.0 lbs.) |
|