Santec TSL-710可调激光器

　　Features

　　Wide Wavelength Range: 1480-1640nm (SCL-Band)

　　High Wavelength Accuracy: +/-2pm

　　Wavelength Resolution: 0.1pm

　　High Output Power: 10dBm (peak)

　　6dBm (full range)

　　Low SSE: 90dB/0.1nm (80dB/nm)

　　Narrow Linewidth: 100 kHz

　　High Sweep Repetition Rate twice as compared with existing products (TSL-510)

　　Applications

　　Optical component characterization:

　　ROADM, WSS, Tunable Filters, lnterleavers, switches, Fiber Bragg Gratings (FBGS), etc

　　Fiber Optic transmission testing

　　Photonic material characterization

　　Optical spectroscopy

　　Lnterferometry

　　Specifications

　　CategoryParameterUnitPerformance

　　High power & Low Noise

　　Wavelength

　　CharacteristicsWavelength Tuning Rangenm1480-1640 (160nm)

　　Wavelength Resolutionpm0.1

　　Absolute Accuracy *1Operating Temperaturepm±2

　　25±1℃ (typ.)±1

　　Repeatability *1pm±1

　　Stability (typ.) *2pm±1

　　Sweep Speednm/sec0.5 to 100

　　Optical Power

　　CharacteristicsOutput PowerPeak (typ.)dBm> 10

　　Full Tuning RangedBm> 6

　　Power Repeatability *1, *3dB±0.01

　　Power Stability *2dB±0.01

　　Power Flatness vs. Wavelength *1, *3dB±0.2

　　Relative intensity noise (RIN) (typ.)dB/Hz-145 *6

　　SpectrumLinewidth (typ.)Coherence Ctrl. OffkHz100

　　Coherence Ctrl. OnMHz40

　　SMSR (typ.)dB> 45

　　Signal to Total Source Spontaneous Emission Ratio *43dB> 70

　　Signal to Source Spontaneous Emission Ratio *5*4dB/nm> 80

　　InterfaceOptical Output Connector-FC or SC, SPC or APC

　　Optical Fiber-SMF or PMF

　　Communication-GP-IB (IEEE 488.2), USB, RS-232C

　　ModulationLF ModulationkHzDC to 400 (Input level -2 to 0V, Modulation depth >50%/V (typ.)

　　RF Modulation (option)MHz1 to 100 (Input level 5Vp-p, Modulation depth >10% (typ.))

　　Environmental

　　Conditions

　　and othersOperatingTemperatureºC15 to 35

　　Humidity%<80(non-condensing)

　　Power SupplyV,HzAC100-240±10%, 50/60

　　Power ConsumptionVA100

　　Dimensions (W) x (D) x (H)mm210 x 440 x 110

　　Weightkg7

　　* All specifications are quoted after 1 hour warm-up period. Specifications apply for wavelengths not equal to any water absorption line.

　　*1: At static condition or "Step" sweep mode. *2: For period of 1 hour. Within ± 0.5 ºC. *3: At “Auto” power mode.

　　*4: Ratio of signal power to total spontaneous emission power within ±15nm of the signal wavelength (typical value).

　　*5: Ratio of signal power to maximum spontaneous emission power in a 1nm band within a ±3nm band around the signal wavelength (typical value).

　　*6: Measured Freq. 1MHｚ to 3GHz