速达最新款T3918A车模枪控遥控器最新款T3918A使用说明及功能

　　功能1.该款车模抢控遥控器带多角度调整功能。此功能允许油门和转向D/R幅度调整。默认最大100% 。

　　功能2.T3918A车模抢控遥控器失控保护功能。（当失控时关掉发射机油门舵机会自动归中）

　　功能三。T3918A遥控器带左右及前后转向对调功能。当安装车模的时候，左右轮胎或者前后轮胎装反了可以利用这个功能使其恢复正常。

　　使用说明:

　　最新款T3918A枪控发射器为二通道，2.4GHZ发射器，使用前需要对码。

　　枪控发射机对码操作步骤:

　　先打开发射机电源，然后按下发射机对码键，LED灯闪烁，再按接收机的对码键。配对完成闪烁常亮， 即说明对码成功。

　　枪控发射机T3918A如何完成防失控设置:

　　在正常工作状态下，先设定各通道失控状态，在连按对码键两次，LED等闪烁2次，设定完成，当未个性设定失控状态本机将默认失控回中。

　　期待越来越多的朋友喜欢上汽车模型，现在汽车模型在国外销售的很好，而国内却还是很空白，具有很好的市场潜力。

　　T3911A radio control instruction

　　2.4G RC with 2 CHannels setup and fail safe function.

　　function 1: with fail safe function, if you don't set out personal fail safe, When out of turn off the transmitter steering gear will automatically go to throttle.

　　function 2: D/R function, it can use the LEFT STEERING D/R and the Right streering D/R to finish set up.

　　How to do "Bind match"?

　　1.switch the transmitter on,

　　2.Press this Bind key, you can see the LED begins to flash.

　　3.then press the bind key on the receiver, when bind match process is completed. led should be a steadily bright ligh.

　　how to set up "fail safe funcion"

　　Nomally the channels should be improperly presetted which simulates the failure being found on them. press the bind key on the transmitter twice and led should flash twice likewise. all the way down, fail safe function is activated.

　　the system return to namal situation if no customed setting is performed.

　　Channels:2channels

　　Model type:R/C car ,R/C boat

　　RF power:less than 10DBm

　　2.4G system:FHSS

　　Code type:GFSK

　　Sensitivity:1024

　　Low voltage warning:yes（less than 4.8V)

　　ANT length:3.5cm

　　Net Weight:266.8g

　　In-put Power:6VDC（1.5AA*4）

　　Size:160mm*95mm*250mm

　　Color:black