确保下载兼容性

　　2. 无需单独安装驱动，直接支持ispLever6.x/7.x/classic版本，ispVM各种版本

　　3. 支持lattice全系列FPGA，SC/SCM/XP/XP2/EC/ECP2/ECP2M/MachXO

　　4. 支持lattice全系列CPLD, 1000/2000/4000 系列

　　5. USB标准B型接口，使用标准USB连接线即可连接PC

　　6. USB供电，无需外部供电支持

　　7. 支持JTAG, internal FLASH，SPI FLASH等编程模式

　　8. 10针分离镀金插针式接口，可支持不同目标板接口

　　（下载线示意图）

　　Lattice ispDOWNLOAD®Cable products are the hardware connection for in-system programming of all Lattice devices. After completion of the logic design and creation of a programming file with the Lattice Diamond®, isp­LEVER®Classic or PAC-Designer®software, the Lattice Diamond Programmer, or Lattice's ispVM™ System soft­ware is used to control the programming of devices directly on the PC board. No additional components are required to program a device.

　　1. After you complete your logic design and create a programming file with the Lattice Diamond/ispLEVER develop­ment tools, you can use ispVM™ System software or Diamond Programmer to program devices on your board. The ispVM System/Diamond Programmer software automatically generates the appropriate programming com­mands, programming addresses and programming data based on information stored in the programming file and parameters you set in ispVM/Diamond Programmer. Programming signals are then generated from the USB or par­allel port of a PC and directed through the ispDOWNLOAD Cable to the device. No additional components are required for programming.

　　2. 出货清单

　　1. 下载适配器1个

　　2. USB A-B型连接线1条

　　3. 75公分10针下载线1条

　　深圳军盛微芯电子科技有限公司

　　E-mail:renguanjun@mymcu.net