USB-ML-MON08

　　P&E USB MON08 Multilink Cable for the 68HC08 MON08

　　P&E USB Multilink MON08交互式转换接口(USB)

　　支持Freescale 68HC08

　　计算机USB接口( Windows 98SE/2000/XP/2003 )

　　计算机USB供电

　　通过MON08向目标板提供2V，3V和5V 125mA电源

　　目标板频率1MHz-8MHz

　　对一些HC08 设备自动判断频率+全兼容能力

　　自动判断HC08设备的频率

　　随机软件:PKG08SZ

　　P&E’s USB MON08 MULTILINK (Part# USB-ML-MON08) is a debug interface which allows a PC access to the monitor mode on Freescale HC08 microcontrollers. It connects between a USB port on a Windows machine and the standard 16-pin “Berg” debug connector on the target.

　　By using the USB MON08 MULTILINK, the user can take advantage of the monitor mode to halt normal processor execution and use a PC to control the processor. The user can then directly control the target’s execution, read/write registers and memory values, debug code on the processor, and program internal or external FLASH memory devices.

　　The USB MON08 MULTILINK works with P&E Microcomputer System's in-circuit debugger and flash programmer to allow debug and flash programming of the target processor. P&E has a set of interface libraries allowing the user to write their own Windows based application which interacts with P&E's debug interface.

　　NOTE: The Multilink cable is only recommended for development. For production usage, see the Cyclone Pro stand alone programmer and debug interface.

　　FEATURES:

　　· USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.

　　· Compatible with HC08 family of microcontrollers.

　　· Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).

　　· Target Voltage: 2,3,5V driven to target, up to 125mA.

　　· Target Frequency: 1MHz-8MHz

　　· Can optionally drive a clock to the target

　　· Auto-frequency detection + trimming capabilities for some HC08 devices.

　　· Auto-frequency detection for HC08 devices.

　　· P&E's PKG08SZ GUI proramming and debugging software can be downloaded at No Charge

　　· For scripted programming, CPROG08SZ command-line programming software is available for purchase.

　　· Includes USB cable, Type A Male to Type B Male, 6-ft.