| project | technical Specifications |
| software | Independent research and development，scalability，compatible EZFIX， CAM350 and other commonly used engineering processing software . |
| operator interface | WINDOWS XP full english operating system |
| test area | 610mm× 530mm |
| number of probe | 2 front 2 after |
| CCDnumber | 1 front 1 afte |
| plywood mode | pneumatic clamps |
| test speed | 1200–2000Point / min |
| test plate thickness | 0.4–6mm(optional) |
| test voltage | 20V–220V (optional) |
| test current | 5mA–250mA (optional) |
| insulation test | 5MΩ–99MΩ (optional) |
| conduction test | 2Ω–2000Ω (optional) |
| minimum pad size | 3 mil ( 0.075 mm ) |
| minimum pad pitch | 4 mil ( 0.101 mm ) |
| X / Y axis resolution | 0.08 mil ( 0.0002 mm ) |
| X / Y axis precision | 1 mil ( 0.0254 mm ) |
| dynamic repeatability | +/- 1 mil ( 0.0254 mm ) |
| flying needlepoint | 3 mil × 3 mil（0.0762 × 0.0762 mm） |
| flying pressure | 4–15 g (optional) |
| X / Y axis | high-precision screw drive |
| Z-axis | high-precision soft belt drive |
| Z-axis frequency | 5–20 Hz |
| installed capacity | 220V, 50/60Hz, 2500W |
| environment | 19–23℃；50–65%relative humidity |
| size | long:1500 mm ,wide:764 mm, high:1950 mm |
| weight | 1050kilogram（with accessories） |