琉璃瓦的成型方法，一般采用挤制成型、手工印坯、注浆成型等方法。西式瓦采用塑压成型。

　　The glass tiles shaping method, generally USES the crowded type, print made by casting, grouting molding method. The western watts plastic forming.

　　1、挤型成型

　　1, extruded shape

　　琉璃瓦的普通瓦件筒瓦、板瓦采用挤制成型，挤坯机（TCL350真空挤出机）是在搅泥机的出泥口加装一个与坯体尺寸相同的机头，搅泥要求真空度大于0．12Mpa，坯泥水分小于18％。待坯挤出后，用钢丝切成瓦坯，放支架上晾干、修坯、干燥后烧成。

　　The ordinary tile pieces glazed tile TongWa, BanWa made the crowded type, crowded billet machine (TCL350 vacuum extrusion machine) is a mixture of mud in the mud mouth machine with a porcelain body size and turn the same, stir mud requirement is greater than 0.12 Mpa vacuum, billet mud water less than 18%. Stay billet extrusion, use wire cut into watts billet, put on the support to dry, the base, after drying the firing.

　　2、手工成型和注浆成型

　　2, manual shaping and grouting to shape

　　琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。手工成型是将坯泥拍打成泥饼，在石膏模内压印出有花纹的坯体，稍干后起坯贴接，将工作面修整打光。手工成型的泥料水分为22％。

　　The glass tiles hook head, DiShuiWa piece and beasts, DingMao, beautiful window is kiss, hang down the beast and the component such use manual molding or grouting to shape. Manual shaping is mud flap will billet into mud cake, in casts internal pressure seal of a decorative pattern porcelain body, a little dry later they stick billet pick, will face nap lighting. Manual shaping clay materials for 22% of the water.

　　压瓦机是将彩涂卷压成型，形成彩钢瓦和镀锌瓦的机器。也就是专门生产彩钢瓦的机器。

　　Pressure tile machine is painted roll forming, form caigang watts and galvanized watts machine. Also is specializing in the production of caigang watt machine.

　　而复合板机器，是将两块的彩钢瓦作为上下铁，用强力粘合剂，粘住中间夹心材料（如泡沫、岩棉、玻璃丝棉等），形成一种保温材料的自动化机器。

　　And composite board machine, is of two up and down the caigang watts as iron, with powerful adhesives, sticking to middle sandwich materials (such as foam, rock wool, spun glass cotton), form a kind of heat preservation material of automatic machine.

　　Contact: ZhangBin

　　欢迎联系洽谈

　　Welcome to contact us and transact