一、标称容量Capacitance:
10pF,65pF,100pF,470pF,500pF,1000pF,1200pF,1500pF,1750pF,2000pF,2500pF,2700pF,
3000pF,3300pF,4700pF,5000pF,5500pF,6800pF,7000pF,9000pF,10000pF,0.01μF,0.012μF,
0.015μF,0.018μF,0.022μF,0.025μF,0.027μF,0.028μF,0.045μF,0.050μF,
0.056μF,0.075μF,0.08μF,0.1μF,0.15μF,0.21μF,0.3μF,0.75μF,0.8μF,1μF,
0.015μF,0.060μF,0.062μF,0.150μF,0.200μF,0.250μF,0.250μF,0.300μF,0.450μF,0.500μF,
0.7μF,0.750μF,0.990μF,1.0μF,1.2μF,1.4μF,1.5μF,2.1μF,2.8μF,
4.0μF,5.2μF
101100pF331330pF471470pF
Code | Capacitancetolerance | Code | Capacitancetolerance |
F | ±1pF | S | +50%,–20% |
K | ±10% | Z | +80%,–20% |
M | ±20% | P | +100%,–0% |
二、工作电流RatedCurrent:
0.06A,0.15A,0.25A,0.3A,0.45A,0.5A,1A,2A,3A,4A,5A,10A,15A,25A,50A,100A
三、额定电压RatedVoltage:
直流:5V,28V,35V,50V,60V,70V,80V,100V,150V,200V,250V,275V
300V,330V,350V,400V,450V,500V,600V,750V,1250V,2500V
交流:70V,85V,90V,115V,125V,140V,200V,220V,230V,240V,330V,350V
四、耐电压DielectricWithstandingVoltage:
直流:额定电压的2.5倍交流:额定电压的6倍的直流电压
五、工作温度WorkingTemperatureRange:
E:-10-+85℃F:-25-+85℃G:-30-+125℃
H:-40-+85℃I:-55-+85℃J:-55-+125℃
温度特征 | 电容变化 | 温度范围 |
SL | SL(0±30ppm/°C) | –25~+85°C |
B | B(+10~–10%) |
D | D(+20~–30%) |
E | E(+20~–55%) |
F | F(+30~–80%) |
C | CG(+350~–1000ppm/°C) | –55~+125°C |
R | R(+15~–15%) |
六、EMI滤波器的构成
滤波电容
滤波器所用的电容一般为陶瓷电容。由于其物理结构,这种陶瓷电容又称为穿心式电容。
穿心式电容自电感较普通电容小得多,故而自谐振频率很高。同时,穿心式设计,也有效
地防止了高频信号从输入端直接耦合到输出端。这种低通高阻的组合,在1GHz频率范围内,
提供了极好的抑制效果。
最简单的穿心结构是由内外电极和陶瓷构成的一个(C型)或两个电容(Pi型)。
这种电容的容量可从10pF,工作电压可达2000VDC。管式穿心电容因为其同轴性,即使在
10GHz频率,也不会产生明显的自谐振。
穿心电容的介质为陶瓷介质,而陶瓷电容的容量会随环境温度变化而变化,这种容量变化
会影响滤波器的滤波截止率。陶瓷电容的容量温度变化率是由陶瓷介质本身决定的。因此,
选择适当的陶瓷介质非常重要。常见陶瓷介质及其容量温度变化率如下:
EIA介质类别 | COG(NP0) | X7R | Z5U | Y5V |
超稳定 | 稳定 | 一般用途 |
工作温度范围 | -55℃~+125℃ | -55℃~+125℃ | -10℃~+85℃ | -30℃~+85℃ |
最大容量温度变化率 | 0±30ppm/℃ | ±15% | -22%~+56% | -22%~+82% |
绝缘电阻Ri | ≥104mΩ | Cr≤25nFRi≤4000MΩ Cr≤25nFRi*≤100S |
损耗(tanб) | Cr>50pF≤0.015 Cr≤50pF≤0.015 (15/Cr+0.7) | <0.025 | <0.030 | 0.050 |
介质强度 | 工作电压 200V 500V >1KV | 施加工作电压的倍数(加压时间5秒,充电电流50max) |
X2.5 | X2.5 | X2.5 | X2.5 |
X1.5 | X1.5 | X1.5 | — |
X1.5 | X125 | — | — |
老化率10进对数时间 | 0 | 1% | 6% | 6% |
滤波电感
滤波电感一般采用铁氧体材料,它可以方便地与穿心电容组合起来,形成复合滤波器,
在高性能滤波器中,也采用线绕电感。但需注意,铁氧材料在大电流下会发生磁饱和,
降低滤波器效能。
七、安装方式FilterInstallationStyle:
H:焊接式Solder-inStyleFiltersI:螺栓式ScrewThreadedStyleFilters
八、螺纹直径公制范围ThreadSize: