USB-ML-12

　　P&E USB BDM Multilink Cable for the 68HC(S)12(X) and 68HCS08 and 68RS08 and ColdFire V1

　　P&E USB BDM Cable交互式转换接口(USB)

　　Windows 98SE/2000/XP/2003/Vista

　　支持Freescale 68HC(S)12(X)/68HCS08/68RS08/ColdFire V1

　　计算机USB接口 ( Windows 98SE/2000/XP/2003/Vista )

　　通过USB供电

　　目标板电压1.6V-5.25V

　　目标板频率32Khz-50Mhz

　　自动判断HCS08 设备的频率+全兼容能力

　　自动判断HC(S)12(X) 设备的频率

　　对RS08设备在RESET line生成烧写电压

　　无随机软件

　　P&E’s USB BDM MULTILINK is a debug interface which allows a PC access to the Background Debug Mode (BDM) on Freescale HCS08, HC(S)12(X), RS08, and ColdFire V1 microcontrollers . It connects between a USB port on a Windows machine and the standard 6 pin “Berg” debug connector on the target.

　　By using the USB BDM MULTILINK, the user can take advantage of the background debug mode to halt normal processor execution and use a PC to control the processor. The user can then directly control the target’s execution, read/write registers and memory values, debug code on the processor, and program internal or external FLASH memory devices.

　　The USB BDM MULTILINK works with P&E Microcomputer System's in-circuit debugger and flash programmer to allow debug and flash programming of the target processor. P&E has a set of interface libraries allowing the user to write their own Windows based application which interacts with P&E's debug interface