北京聚合氯化铝

名称:北京聚合氯化铝

供应商:北京惟事美环保科技有限公司

价格:1.00元/吨

最小起订量:1/吨

地址:北京市通州区富河园

手机:15101668826

联系人:张少杰 (请说在中科商务网上看到)

产品编号:45989596

更新时间:2021-02-07

发布者IP:61.148.220.202

详细说明

  聚合氯化铝、碱式氯化铝

  Polymeric aluminum chloride, basic aluminum chloride

  性能:北京聚合氯化铝(Polyaluminium Crforide)简称PAC,通常也称作北京碱式氯化铝或混凝剂等,它是介于AlCl3Al(OH)3之间的一种水溶性无机高分子聚合物,化学通式为[Al2(OH)nCl6-n]m其中m代表聚合程度,n表示PAC产品的中性程度。颜色呈黄色、深褐色、深灰色树脂状固体。该产品有较强的架桥吸附性能,在水解过程中,伴随发生凝聚、吸附和沉淀等物理化学过程。

  Performance: polyaluminum chloride ( Polyaluminium Crforide ) referred to as PAC, is also often referred to as the basic aluminum chloride or coagulating agent, it is in the range of AlCl3Al ( OH ) 3 between a water soluble inorganic polymer, chemical formula [Al2 ( OH ) nCl6-n] m wherein M represents the degree of polymerization, said n PAC product neutral degree. The color yellow, dark brown, dark grey resin solid. The product has strong bridging adsorption performance, in the hydrolysis process, the concomitant occurrence of condensation, adsorption and precipitation and other physical and chemical processes.

  聚合氯化铝与传统无机混凝剂的根本区别在于传统无机混凝剂为低分子结晶盐,而聚合氯化铝的结构由形态多变的多元羟基络合物组成,为无定形的无机高分子,因而聚合氯化铝表现出许多不同于传统混凝剂的特异混凝功能。

  Polymeric aluminum chloride with traditional inorganic coagulants is the fundamental difference between traditional inorganic coagulants for the low molecular weight crystalline salt, and polymeric aluminum chloride structure by changing patterns of multiple hydroxyl complex composition, as amorphous inorganic polymer, and polymeric aluminum chloride showed quite different from the traditional coagulants specific coagulation function.

  用铝酸钙调整法生产的PAC产品,盐基度(碱化度)可大幅度提高,生产和使用的经济效益非常明显,盐基度从65%提高到92%,生产原料成本可降低10%,使用成本可降低40%。净水效果优于其它生产工艺的同类产品。

  Calcium aluminate for adjustment method for the production of PAC products, basicity ( Alkalinity ) can greatly improve the production and the use, the economic benefit is very obvious, basicity increases from 65% to 92%, the production cost of raw materials can be reduced by 10%, the use of cost can be reduced to 40%. Water purification effect is superior to other similar products the production process.

  北京聚合氯化铝用途:该产品广泛用于生活、生产用水、生活污水、工业废水的净化,低温低浊水的净化处理,造纸、制革废水处理,热电厂冲灰废水回收利用、印染、毛纺、废水去除COD、BOD及SS的脱色净化。

  Use: This product is widely used in daily life, production of water, sewage, industrial waste water purification, low-temperature and low-turbidity water purification treatment, papermaking, tanning waste water treatment, thermal power plant ash waste water recycling, printing and dyeing, wool, waste removal of COD, BOD and SS decolorization and purification.

  北京聚合氯化铝使用方法:⑴将固体产品与常温水1:2.5—1:3(重量比)混合搅拌30分钟,等药品完全溶解后,加30—40倍清水稀释或根据所需浓度稀释成液体后使用。⑵源水浊度在100—500mg/L时,投加量为5-10mg。用前最好根据水质特性进行小试,选出最佳值,然后投用。

  Method of use: the solid product with the normal temperature water 1: 2.5: 1: 3 ( weight ratio) mixing for 30 minutes, and other drugs completely dissolved, add 30 - 40 times of water dilution or according to a desired concentration dilution into liquid after use. The raw water turbidity in 100 - 500mg / L, dosage of 5-10mg. Before using the best according to the water quality characteristics of small, select the best value, and then cast with.

  北京聚合氯化铝产品特点:⑴在常温下化学性稳定,久贮不变质,固体裸露易吸潮,但不变质,无毒无害。⑵适应水范围PH值为4-14,但最佳处理范围PH值为6-8。⑶处理水体适应能力强,反应快、耗药少、制水成本低,矾花大、沉降快,虑性好,可提高设备利用率。

  Product characteristics: 1 at room temperature, chemical stability, and storage for modification, solid bare is easy to absorb moisture, but does not deteriorate, non-toxic harmless. The water pH value of 4-14 adaptation range, but the optimal treatment for 6-8 range of pH. The treatment of water adaptability, fast response, little medicine consumption, low-cost water, alum, fast sedimentation, consider good, can improve the utilization rate of equipment and installations.

  包装及储存:

  Packaging and storage:

  1、该产品内衬聚氯乙烯塑料薄膜,外层为聚丙烯编织袋包装,每袋净重25kg/。

  In 1, the product is lined with polyvinyl chloride plastic film, the outer layer is polypropylene woven bag, net weight of each bag is 25kg /.

  2、储存在阴凉、干燥处,防日晒雨淋,不得与有毒、易燃、易腐物品混放。

  2, stored in a cool, dry place, prevent the sun and rain, and may not be toxic, flammable, perishable goods mix.

  北京聚合氯化铝主要技术参数

  Main technical parameters

  指 标 名 称 液 体 固 体

  A standard name called liquid and solid body

  优 级 一 级 二 级 优 级 一 级 二 级

  And level two and level two level

  外 观 无 色 淡 黄 色 淡 黄 色

  No color is light yellow outer view pale yellow color

  相对密度(20℃) 1.15 -

  Relative density (20 degrees C ) 1.15

  氧化铝(AL2O3)≥% 10.0 30.0 28.0 27.0

  Alumina ( AL2O3 ) = % 10 30 28 27

  盐基度(B)% 40-85 40-90 40-90

  Basicity ( B ) % 40-85 40-90 40-90

  水不容物%≤ 0.1 0.2 0.5 0.5 1.0 1.5

  Water insolubles % = 0.1 0.2 0.5 0.5 1 1.5

  PH值(1%水溶液) 3.5-5.0 3.5-5.0

  PH (1% solution ) 3.5-5.0 3.5-5.0

  硫酸根(SO2-)%≤ 3.5 - 9.8

  Sulfate ( SO2 < 3.5 - 9.8 ) %

  氨态氮(N)%≤ 0.01 0.02 - 0.01 -

  Ammonia nitrogen ( N ) % = 0.01 0.02 - 0.01 -

  砷(As)%≤ 0.0001 0.0002 - 0.0002 -

  Arsenic ( As ) % = 0.0001 0.0002 - 0.0002 -

  锰(Mn)%≤ 0.0025 0.0050 - 0.0075 0.010 -

  Manganese ( Mn ) % = 0.0025 0.0050 - 0.0075 0.010 -

  六价铬(Cr6+)%≤ 0.0005 - 0.0005 -

  CR six + ( Cr6 + % = 0.0005 - 0.0005 )

  汞(Hg)%≤ 0.00001 - 0.00001 -

  Mercury ( Hg < 0.00001 - 0.00001 ) %

  铅(Pb)%≤ 0.0005 0.001 - 0.001 -

  Lead ( Pb ) % = 0.0005 0.001 - 0.001 -

  镉(Cd)%≤ 0.0001 0.0002 - 0.0002 -

  Cadmium ( Cd ) % = 0.0001 0.0002 - 0.0002 -

  注:氨态氮、砷、铅、镉、汞、六价铬等杂质的质量分数均按10.0% AL2O3 计。

  Note: ammonia nitrogen, arsenic, lead, cadmium, mercury, chromium six impurities such as quality scores were at 10% AL2O3 gauge.

  Beijing polymerization aluminum chloride for more product information please contact:

  Company name: Beijing but the thing the United States Environmental Protection Science and technology limited company