Model:Bante950 Precision Conductivity/TDS/Salinity/oC/oF Meter

　　Bante 950 is a powerful and easy-to-use meter, which used to measures the conductivity, Total Dissolved Solid (TDS), salinity and resistivity of liquids. The meter widely used in hydroponics, aquaculture, freshwater systems to monitor the amount of nutrients, salts or impurities in the water.

　　* Functional Characteristics:

　　-Automatic Calibration

　　The meter can calibrate 1 point in each of the measuring ranges. From Setup Menu, choose calibration and press the key to set known conductivity values, immerse the conductivity cell into calibration solution, press Enter key and meter is automatically calibrated.

　　-Calibration Solution Recognition

　　During the calibration, if the calibration solution does not match the meter’s indicated value, an ERROR message is displayed. This function will prevent an inaccurate calibration.

　　-Auto-Ranging

　　The meter has auto-range function for measuring conductivity and TDS. Upon immersing conductivity cell into sample solution, the screen will immediately displays the reading in appropriate measurement range for accuracy.

　　Adjustable Temperature Coefficient Various ions may have different temperature coefficients, The meter

　　can set the temperature coefficient between 0 and 3.9% in degrees Centigrade for optimum accuracy.

　　-Adjustable Cell Constant

　　The meter has 3 cell constants for measuring requirements. Once a cell constant has its calibration set, it is saved and does not require re-calibration when switching sensors.

　　-Adjustable TDS Coefficient

　　Bante 950 meter can manually adjustable TDS coefficient between 0.01 and 1.00 to ensure optimum measurement accuracy.

　　-Automatic Temperature Compensation

　　The meter provides manual or automatic temperature compensation mode for optimum accuracy under variable temperature conditions. Insert the temperature probe into meter, the temperature value will automatically displays on the screen.

　　-Message Indicator

　　Bante 950 meter has message indicator, it can shows many Helpful messages like an on-screen manual for easy operation.

　　-Communication Interface and Data Store

　　The meter has a real-time date / clock stamps, the memory stores up to 99 data sets. Press the SAVE key to store the current measured values and it automatically generates a serial number with time. All of stored data can then be sent to a computer via the USB port.

　　* Technical Parameters:

　　-Meter Included:

　　Conductivity Cell, Temperature Probe, Power Adapters.

　　-Conductivity Cell: CON-1 and CON-10

　　-Temperature Probe

　　The temperature probes used for measuring the temperature value with a meter, it is for use with Bante 2 and 5 series meters, PHS-W series and DDS-W series meters, Bante 9 series meters, MS series magnetic stirrers.