TDSscan series Pocket TDS tester TDSscan 10/20/30

　　TDSscan series pocket TDS tester includes models 10, 20, 30 for measuring the total dissolved solids in liquids.

　　The user need to select the different meters for measuring the sample according to its TDS range, the rule as follows:

　　TDSscan 10 tester used for measuring the TDS of pure water,

　　TDSscan 20 tester used for measuring the TDS of general liquids.

　　TDSscan 30 tester used for measuring the TDS of high conductivity liquids.

　　*Technical specifications:

　　-Platinum Sensor

　　TDSscan series tester use a standard platinum sensor for fast and reliable measurement. Replaceable sensor design easy for maintenance.

　　-Single Point Calibration

　　The testers allows user to use customized calibration solution. You can set the known conductivity values on the tester and immerse the sensor into conductivity calibration solution, press CAL key and the tester is automatically calibrated.

　　-Hold Function

　　During the measurement, press the HOLD key, the testers will freeze the reading momentarily on the display for easy viewing or recording.

　　-Auto-Power Off

　　The testers will automatically power down 8 minutes after the last key press. This function is helpful to save battery. It can also be turned off manually.

　　-Waterproof Feature

　　O- ring seals on the screw - tight battery and sensor compartments prevent water damage even if fully immersed. If the tester sink into the water, it will float automatically.

　　-Meter Included:

　　Batteries and Optional Accessory(Carrying Case)

　　PS:Carrying Case($:100)

　　1.The carrying cases uses the high strength plastic manufacturing, built-in the sponge. The black case can efficacious stain-resistant, it is a good tool for outdoor application.

　　2. What's included:

　　Pocket Tester, Storage Bottle, Batteries.

　　*Technical Parameters: