CONscan series pocket conductivity tester includes models 20, 30, 40 for measuring the electrical conductivity of water, these meters without temperature compensation function.

　　The user need to select the different meters for measuring the sample according to its conductivity range, the rule as follows: CONscan20 meter used for measuring the conductivity of pure water; CONscan30 meter used for measuring the conductivity of general liquids, e.g tap water, rainwater; CONscan40 meter used for measuring the conductivity of high conductivity liquids.

　　*TECHNICAL SPECIFICATION:

　　-Platinum Sensor

　　CONscan series tester use a standard platinum sensor for fast and reliable measurement. Replaceable sensor design easy for maintenance.

　　-Single Point Calibration

　　The testers allows user to use customized calibration solution. You can set the known conductivity values on the tester and immerse the sensor into conductivity calibration solution, press CAL key and the tester is automatically calibrated.

　　-Hold Function

　　During the measurement, press the HOLD key, the testers will freeze the reading momentarily on the display for easy viewing or recording.

　　-Auto-Power Off

　　The testers will automatically power down 8 minutes after the last key press. This function is helpful to save battery. It can also be turned off manually.

　　-Waterproof Feature

　　O- ring seals on the screw - tight battery and sensor compartments prevent water damage even if fully immersed. If the tester sink into the water, it will float automatically.

　　-Meter Included:

　　*Batteries

　　*Optional Accessory: Carrying Case($:100)

　　PS: 1.The carrying case uses the high strength plastic manufacturing, built-in the sponge. The black case can efficacious stain- resistant. It is agood tool for outdoor application.

　　2.What's included: Pocket Tester; Storage Bottle; Batteries.

　　*TECHNICAL PARAMETERS: