一、KGN 气压吹气型静电消除装置
產品名稱 : KIB-025 氣壓式吹氣型
型號 : KIB-025
特点（Features）:
1、不会形成集中电厂，可以接近被除电物至1mm的距离
Does not form concentrated electric fields ; the nozzle could be sa close as close as 1mm to the targeted object.
一般的静电消除器由于高压施加部会形成强力集中电场，所以太接近的话，可能对设备装置造成损害；而KGN静电消除装置不会形成集中电场，对设备装置不会造成损害，因此喷嘴端与被除电物可接近至1mm的微距消除静电。
A strong electric field is generated at the high voltage applying section in the current ionizer . This can cause breakage of the device when bring it close. Minimumdistance between the nozzle and the targeted object is 1mm.
2、电离子可经由导电性管或金属管移送，克服设备内空间狭窄的困扰。
The ions could be transferred through a conductive tube or metal tube, overcoming the problem of narrow spaces in the equipment.
在除电器本体无法设置的地方，亦可达成除静电目的；不受限于安装空间。
Allows removal of stativ electricity an limited space to install the ionizer body.
3、用低电压电源即可使用，无高电压配线的危险性。
Could be used with low-voltage power supplies; there'sno risk of high voltage wiring.
内建小型高压电源变压器，用低压电DC电源即可使用，无需专用的高压电源及高压配线，配线应用时没有高压电源问题的困扰。由于输出电压低，所以使用时几乎不会产生电气杂讯。
This unit can be used with a low-voltage DC power supply due to an in-built compact high voltage transformer . It eliminates high voltage wiring and power supply , making it free of problems caused by power supply and wiring sections. Veru low feneration of electrical noise due to low-voltage output.
4、多样性的喷嘴配件供选择，可对应各种静电消除需求。
Multiple choices for nozzle accessory to apply various enquiry
应用导电性、可挠性管、金属管.....等，来移送电子离子，由于能以精确的定位方式接近被除电物，所以能达到迅速且确实的除静电效能。
By using an air tube or flexible tube metal pipe, it can quickly remove static electricity from a targeted point due to the ability to move the nozzle closer to the point.
5、优越的离子平衡，确保除静电效能
Due to good ions balance , removal of static electricity is always possible
除电距离10mm，离子平衡±15V(依使用条件状况，可达±10V以内)。
除电距离100mm，±1000V至±100V的衰减时间可在1秒内。
±15V range at 10mm distance.（Under some conditions, with 10V this could be attainable.）
Decay time from ±1000V to ±100V at 100mm distance is within a second.
二、KGN风扇型静电消除装置
產品名稱 : 風扇型靜電消除裝置N/T系列
型號 : KIF-1000N/T KIF-2000N/T
特点（Features）:
1、模组化易维护 Modularized design for easy mainternance
利用模组设计，大幅缩减维护成本及回复运转的重置时间，不论何地皆可轻松完成。
Leveraging modular design to significantly reduce maintenance cost and recovery time.
2、上视面板显示 Display on top of device frame
正面面板及机台上方亦可显示运转状态，不论放置于桌面或设备内皆可清楚得知使用状态。
Operation status display can be located at the front panel or on top of the device frame.Operation status can be easily monitored when either on the desktop or inside other equipment.
3、铝合金机壳Aluminum alloy frame
阳极表面处理，不造成二次污染。
Anode surface treatment without secondary pollution.
4、离子放电暂停 Iondischarging suspension
可有效延长放电针清洁周期
Panel display status will also effectively extends cleaning time for discharging pins.
5、快速清针机构 Fast pin cleaning mechanism
四刷毛设计，快速取出针尖结晶。
Four-brush design for fast removal of crystals accumulated at pin tips.
6、薄形轻巧省空间Compact and space saving
轻巧机体，让空间利用更加灵活。
Compact design for flexible space utilization.
三、KGN 空间除电型静电消除装置
產品名稱 : KIS-400 空間除電型
型號 : KIS-400
特点（Features）:
1、优越的离子平衡，确保除静电效能
Due to good ion balance, removal of static electricity is always possible
高精度、高稳定的离子平衡:25V。（依使用条件及状况，可达±10V以内）
It provides high accuracy and stabilization of balance of ionization ±25V.(Under some conditions, with ±10V this could be attainable.)
2、多样性的喷嘴配件供选择，可对应各种静电消除需求
Multiple choices for nozzle accessory to apply various enquiry
应用导电性、可挠性管、金属管.....等，来移送电子离子，由于能以精确的定位方式接近被除电物，所以能达到迅速且确实的除静电效能。
By using an air tube or flexible tube metal pipe, it can quickly remove static electricity from a targeted point due to the ability to move the nozzle closer to the point.
3、安全监控十分简便 Security monitoring , very simple
高压异常指示灯及输出接点标准配备，安全监控十分方便。
Abnormal high-pressure warning indicator and output accessories are equipped for easy safety monitoring.
4、节省更新成本、维修费用
Save on updating costs and maintenance fees
放电针可单独购买及自行更换安装，有效提升使用寿命及确保除静电效能；节省更新成本及维修保养费用。
For economy and efficiency , replaceeable discharge needles are available as required.
5、铝质外壳轻巧设计
Aluminum case is lightweight
小型轻量化设计，不论应用于工作上或设备搭载皆可提供弹性的设置选择。
Aluminum case is lightweight . The lonzier having compact and light , versatility of mounting for equipment of bench.