Pedal sensor induction switch, foot switch. Internationalization of overall qualities (1) controlled by microcomputer, fine wire drawing stainless steel design. (2) positive dark outfit fixed screw, the embedded small correlation eye head light. Easy installation, stable performance, strong anti-jamming capability. (3) applied in hospital operating room, laboratory, and the clean room entrance automatic door sensor control. (4) microprocessor modem active active infrared light. (5) detection mode: the soles of your feet, the beam is truncated, trigger a signal to open the door Main technical parameters of technical measures: microprocessor modem active active infrared light. The recommended installation height: the center from the ground 0.3 meters. Can choose single and double only. Beam and a half wide Angle: 5 degrees. Detection mode: the soles of your feet, the beam is truncated, trigger a signal to open the door. Response time: relay output 45 ms or less power input: AC/DC 12 ∽ 36 v engine power consumption: 82 MA monitoring signals: 4.5 S MA signal indication: correlation control effectively, normally on a red light, the beam is truncated when the green light flashing. Ambient temperature: - 20 ℃ ∽ + 55 ℃ anti-jamming: sunshine 81000 lux flashlight lamp to 36000 lux electronic microwave comply with 89/336 / CEE standards Appearance size: 118 mm * 100 mm * 55 mm (master controller) 19 mm * 13 mm (light eyes) with 186 mm * 175 mm x 55 mm shell (main) signal output: dry contact signal relay it always open. The 2007-9-15 00:36:15