Feature Overview

　　IpDCNI series DC/DC converter applies advanced technology and is configured specifically for electric vehicles. It is very suitable to supply power to the lamp and audio system as it is very stable and clean. The advantages of high efficiency, stability and compact size, are achieved by adopting the advanced high frequency technology. It is sealed by silica glue to get water and vibration proof, which ensures the stability of the vehicle in atrocious condition.

　　Current equalizer is built in, which makes converters work in parallel possible in order to enlarge the capability.

　　No arc design, which can be controlled by the key switch directly and no contactor is required.

　　Some DC/DC converters modules can be used in parallel directly to increase current.

　　Specifications

　　Input Voltage: 36V 48V 60V 72V

　　Output Voltage: 12V/ 24V

　　Max Output Current: @12V:20A/ 30A

　　@24V:15A/ 20A

　　Maximum Efficiency: no less than 90%

　　Environmental Enclosure: IP68

　　Shock and Vibration: SAEJ1378

　　Safety-North America: UL2202/UL1564 2nd Edition

　　Emissions- North America: FCC Part 15/ICES 003 Class A

　　Immunity-Europe: EN61000-4-2/3/5/6/11

　　Operating Temperature:-20 Celsius degree to +50 Celsius degree(-22-122)

　　Protections

　　Water and Vibration Proofed: All sealed by silica glue to get water and vibration proof, which is suitable for all kinds of condition.

　　Input reverse polarity protection: Shut down, auto-reset.

　　Water Proofed Fuse: Input or output fuse, simple wring.

　　No Arc: Input with no arc, can be controlled by key switch directly, without contactorn

　　Short Circuit: Shut down with little plus current, auto-reset, ensure the wire safety.

　　Superheating Cutback: Reduce output current if the temperature is over 65°C, ensure the continuous power for your car.

　　Reverse Polarity: Electronic protection, auto-reset.

　　Input Low Protection: Shut down, auto-reset, prevent the battery from over discharging

　　Name Rule

　　Type Table

　　Wire

　　Yellow:Input +（2.5mm2）

　　Red:Output +（4.0mm2） Black:Input & Output -（4.0mm2）

　　Green: Control (0.5mm2)

　　Note:It will cause problem when faulty connecting the output as input.

　　Installation Size

　　Appendix

　　Fig1. The wiring diagram of DC/DC converter with control wire