详细说明
| 1 | Introduction Handheld Programmer ProCom2 adapts for programming and diagnosing inPower charger. ProCom2 is a simple and convenient operation programmer. 1.1 Performance and Function • Adapt for all inPowercharger. • Graph LCD，Every screen displays 4 lines of letters. • Direct, Simple Manu Mode • Multi-Layer Manu for easily parameter management. • Easy copy parameters from one charger to another l A set of charge algorithms are available l User-defined charge algorithms are available 1.2 Working Condition • Working Temperature -10°C to 50°C • Storage Temperature -40°C to 70°C • Protection Level IP22 Note: Portable Programmer ProCom2 adapts for inPower chargers ONLY. It must be plugged into the socket for programming of the charger. Otherwise it will be permanent damaged. |
| 2Overview |
| | 2.1 LCD Screen Resolution 128 x 64 Graphic LCD，every screen displays 4 lines letters or 8 lines graphs. 2.2 Right/Left Key Controls the moves of cursor in menu. Right key for down, Left key for up. Cursor position displays contrary. When the parameter is chosen, Right key for increasing, Left key for decreasing. 2.3 Enter Key Switch cursor from one parameter/data to another. Download the modified parameters to controller. Download expert mode, memory mode or customized mode parameters to controller. 2.4 Escape Key Back from sub-menu Back from current parameters modification, the modified parameters are not downloaded to controller. |
| 3 | Operation Guide ProCom2 is menu structure, the interface is simple and easy operation. 3.1 Main Menu The Manu menu includes 4 menus: l 1. PARA COPY: Copy the selected algorithm to the chargers. l 2. PARA SET:Set the parameters of the algorithm stored in the charger. l 3. STATU CHECK:The function can display the type of the charger and date of the product made. 3.2 Parameter Copy Copy the selected algorithm to the chargers. 3.3 Parameter Set Set the parameters of different charging stage.The parameters include: voltage, current and time, etc. After setting the parameters, the user can store the parameters as NO., and decide whether the parameters will be downloaded to the chargers. Note: In order to keep the parameters secret, the parameters displayed by the Handheld Programmer ProCom2 in PARA SET is default parameters, and NOT the parameters of the charger. 3.4 STATU CHECK The function can display the type of the charger and the date. CURRENT: Display the MAX OUTPUT CURRENT of the charger. It can be revised but it cannot be more than the max current allowed. |
4
How to connect the Handheld Programmer ProCom2
（1）Open the upper cover of the charger
（2）Connect the plug of the Handheld Programmer ProCom2 to J_com1 on the control board of the charger.
（3）Do not connect the terminal of DC CORD to the battery,press the black button on the LED board and HOLD ON,then turn on AC INPUT POWER to the charger.Do not release the black button until all LEDs are lit except FAULT LED.
Then,you can use the programmer to edit parameters.
PARA COPY:You can edit the parameters of the charge curve stored in the programmer,but please insure that the selected charge curve has been saved.In factory,only charge curve 1 has been saved ,and the charge curve 1 cannot be overwrite.
PARA SET:You can edit every parameter,then store the parameters in CHARGER CURVE by SAVE AS. and you can store the parameters to the charger by SET NOW.