深圳市西德利电子科技有限公司(出品)
深圳市联邦重科电子科技有限公司(制造)
50W(50*1W)LED植物生长灯
厂家直销+质保两年+全球保修+返修运费。
市场上的植物灯基本都是我们工厂做的,请说出您的要求,我们按要求生产。
深圳本地的可以前来工厂直接拿货,也可参观,专职工程全程陪同为您讲解植物灯的知识。
50W大功率LED植物生长灯,可以促进植物生长,缩短生长周期,代替太阳光完成植物光合作用。
通常比例是红蓝45:5(8:1)有特殊比例的请联系掌柜。
1.50W 迷你UFO型LED植物灯(LED植物补光灯),含50PCS单颗1WLED,内置45W恒流源1PCS,具有高性能,低能耗等优点。
2. 产品输入电压为85-264V,使用方便,安全,适用于任何国家。
3. LED寿命高达50000小时。
4. 内置1PCS风扇,可有效降低产品工作时散热问题,保证产品正常使用时间。
5. 适用于各种植物生长,开花,结果。
6. 产品含有不同比例方案,红光促进开花结果,蓝光促进长叶子,客户可以根据不同植物采用不同灯珠配比。
7. 安全,环保不含污染与有害物质。
参数:
项目 | 数值 | 项目 | 数值 |
尺寸 | Ф175x 60mm | 功率 | 50W(50x1W) |
输入电压 | AC85~264V | 流明 | ≥1500lm |
输入电流 | 300mA | 寿命 | 50,000 小时 |
工作频率 | 50/60 Hz | 颜色 | 红/蓝/白/橙/黄 |
工作环境 | -20~40℃ | 照射面积 | 19.6 M2/3m |
内箱包装 | 205x205x130 mm/1PCS | 毛重 | 1.25kg/pcs |
外箱包装 | 425x425x160 mm/4PCS | 毛重 | 5.85kg/4pcs |
产品特点:
1.50W 迷你UFOLED植物灯能够代替3-5倍功率的高压钠灯, 节约80%的电能.
2. 1W 大功率LED作为光源.
3. 寿命高达5万小时.
4. 不同光之间的比例可由客户指定,我们建议的比例是(红:蓝)8:1, 7:2 和7:1:1 ,红.蓝.橙.白.黄混合光提供给植物.
5. LED波长可由客户指定, 我们建议红光波长使用620-630nm和640-660nm, 蓝光波长使用450-460nm和 460-470nm.红光促进植物发芽,开花, 蓝光促进植物生长,你可以自主选择更合适的波长和颜色比例促进植物的生长。
6. 内置的冷却系统 (风扇散热 )很好地解决了散热问题。
7. 内置的带有CE认证的电源, 无其他设备的配置, 直接简单安全的插头接入AC85V~264V的电压, 不需要反射镜和镇流器.
8. 理想的适用于各种阶段的植物生长, 能够很好地与室内花园,水溶液培养的或是土壤养殖的植物工作的很好.
9. 灯的照射面积和高度会根据不同的植物和环境会相应地有所改变,而且技术参数也会变化.
10. 产品所有用料环符合环保的要求,不含汞等有害的重金属物质。
11. 可选 14W/45W/50W/120W/200W/400W/300W/300*2W/600W 和特别定制
注意:
1.50W 迷你UFOLED植物灯只能室内使用.
2. 安装前切断电源,防止触电,在工作时避免用手触摸灯的表面。
3. 使用时确保产品在正常环境下使用。
4. 避免安装在热源处及热蒸汽,腐蚀性气体的场所,以免影响寿命。
5. 安装前确保安装位置可以承受10倍于该产品的重量。
6. 安装于无震动,无摇摆,无火灾隐患的地方
7. 本产品无防水功能,切勿淋水。
8. 产品在工作时切勿触摸,敲打产品。
9. 以上产品参数为灯具常规比例(红光:蓝光=8:1)时参数,仅供参考,客户可以根据自己不同需要选择不同的灯珠配比。
1.Use high efficient 1w LED as the light source , base on 50*1 high power LEDs with metal cover , built in 1 pcs 45w constant current source , it will more energy efficient
2. Input voltage : 85-264V,easy to use and safty , suitable for all the countries .
Parameter:
Item | Value | Item | Value |
Size | Ф175x 60mm | Power | 50W(50x1W) |
Input Voltage | AC85~264V | lumens | ≥1500lm |
Input current | 300mA | Lifespan | 50,000 hours |
Frequency | 50/60 Hz | Color | R/B/W/O/Y |
Working environment | -20~40℃ | Lighting area | 19.6 M2/3m |
Inner box | 205x205x130 mm/1PCS | GW | 1.25kg/pcs |
Carton box | 425x425x160 mm/4PCS | GW | 5.85kg/4pcs |
Specification:
1. 50WLED grow lightcan replace the 150w-250w HPS , over 80% energy saving .
2. Base on the 1w LED chip.
3. Overy 50000 hours .
4. Our common light ratio :8:1 , 7:2 , 7:1:1 with the mixtureof red , blue , orange ,yellow and white lights, or customized as your requests
5.Blue LEDs can easily be added to enhance vegetative growth , red LEDs are good for promoting the fruiting and flowering stage ,our suggestionson the wavelength arered (620-630nm) , red(640-660nm) , blue (450-460nm) , blue (460-470 nm) , You can choose the wavelength and color ratio which is most suitable for your plant growth
6.Built-in cooling system (thermostatically controlled fans ) solve the heat dissipation excellently
7. Built-in power supply, CE approved, No setup required, just simpler and safer plugs directly into AC85V-264V, no reflector & ballast needed.
8. Ideal for all phases of plant growth, and works well with any indoor garden, hydroponics or soil based.
Notice:
1. Indoor use only .
2.Turn off the power before installment, don't touch the surface of the lights when light on
3. Please make sure using in the normal environment
4. To avoid using nearby the hot or heat source place, where has the corrosive gas.
5. Make sure the installment place could afford 10 times of the weight of light..
6. Installed position must be no shock, no fire hidden danger
7. The producst is non waterproof, so put it in the dry place .